3M Weatherstrip Cement

Item # 511114 ALL+

This is black 3M brand weatherstripping cement, 5-oz tube. This is a superior 3M product! Weatherstrip adhesive is a strong, flexible, rubbery adhesive that can withstand vibration and extreme temperature variations. Can be used to bond automotive weatherstripping and is a great adhesive for holding cork, or rubber gaskets.

This part fits most Cars and Trucks.; exceptions may apply. Please read the complete description to see if this part fits your specific vehicle and application.

Share |

$20.00 Each

SecurityMetrics Credit Card Safe

This product can expose you to a chemical, which is known to the State of California to cause cancer or reproductive harm.

For more information go to www.P65Warnings.ca.gov

3M Super Weatherstrip Adhesive is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, vinyl headliners, and side panels in place. Features:High StrengthFlexibleAdhesion To Many SubstratesFast DryingGood Oil and Water ResistanceHigh Temperature ResistanceTypical Physical Properties:Container: 5 oz. TubeBase: Neoprene RubberDensity in lbs/Gallon: (Appx.) 7.6Color: Black Flash Point: -14?F Viscosity (CPS):Brookfield Viscometer 4,500 CPSSolids Content: (Appx.) 39.0%Consistency: Heavy LiquidService Temperature: -20 to -300?FDirections for Use:Thoroughly clean surfaces to be bonded. Wiping with 3M General Purpose Adhesive Cleaner (P.N. 08984 or P.N. 08987) will aid in removing oil and dirt. Apply a thin, uniform coat of adhesive on each surface. Allow adhesive to dry until tacky but will not transfer to your knuckle when touched (maximum dry time about 4 minutes). Assemble materials with sufficient pressure to ensure contact. Greater initial strength may be obtained by reactivating. To reactivate, coat both surfaces with adhesive and allow to dry tack free. Lightly coat surface with at thin coat of adhesive or lightly wipe with 3M General Purpose Adhesive Cleaner (P.N. 08984). Complete bond within 30 seconds.Applications:Weatherstripping and Gasketing Adhesive.Cloth and supported vinyl bonding.General rubber bonding.Good adhesion to wood, metals, painted surfaces and some plastics.Storage and Handling:Store at room temperature

Leave a product Review
Product Reviews

Product Fits Vehicle Models