CHEVS »

Car Parts »

Hood »

This is the grommet for the hood cable that is located in the latch plate under the hood.

For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is the grommet for the hood cable that is located in the bracket under the hood.

For 1940 1941 Chevrolet Cars

This is a hood cable assembly with the knob. (From the nut to the end of the housing is 71 inches in length. Also measures 74 inches from the nut to end of the control wire).

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 Chevrolet Cars

This is a plain steel painted black hood handle.

For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks

This is a chrome hood handle.

For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks

This is a brown hood knob with white letter 3/16 inch inside diameter shaft hole.

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 Chevrolet Cars

This adjustable wire end stop is for hood, choke and throttle cables etc.

For All Chevrolet Cars and Trucks

This polished aluminum bullnose piece replaces the hood center strip and the hood ornament for a nice, clean, smooth look. It's 55 inches in length x 1/2 inch wide. Comes with...

For 1940 Chevrolet Cars

This polished aluminum Bullnose piece replaces the hood center strip and the hood ornament for a nice, clean, smooth look. It's 57 inches in length x 1/2 inch wide. Comes with...

For 1941 Chevrolet Cars

This polished aluminum Bullnose piece replaces the hood center strip and the hood ornament for a nice, clean, smooth look. It's 55 inches in length x 1/2 inch wide. Comes with...

For 1949 1950 1951 1952 Chevrolet Cars

This polished aluminum Bullnose piece replaces the hood center strip and the hood ornament for a nice, clean, smooth look. It's 57 inches in length x 1/2 inch wide. Comes with...

For 1953 1954 Chevrolet Cars

These are the moulding clips that retain the painted vertical nose moulding on the hood. (the length of the clip is 13/16 of an inch).

For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is the hood moulding clip that retains the hood center moulding.

For 1949 1950 1951 1952 Chevrolet Cars

This is a reproduction chrome center strip moulding for the hood that has no holes for the hood ornament. *NOTE* You need to grease the hinges upon installation.

For 1937 Chevrolet Cars

This is the chrome center strip hood moulding *NOTE* You need to grease the hinges upon installation.

For 1938 Chevrolet Cars

Give your cowl vent a lift with this powerful motor kit that comes complete with gear motor, brackets, hardware, interior switch, wire, connectors, and instructions. The steel...

For All Cars and Trucks

This hood emblem bow tie is made of durable blue vinyl.

For 1951 Chevrolet Cars

These colored inserts are decals for the hood emblem.

For 1942 Chevrolet Cars

These colored inserts are decals for the hood emblem.

For 1946 Chevrolet Cars

Hood Emblem.

For 1940 Chevrolet Cars

This is the plastic hood ornament piece that fits inside of the chrome surround.

For 1953 Chevrolet Cars

This is the plastic hood ornament piece that fits inside of the chrome surround.

For 1954 Chevrolet Cars

This is a complete hood ornament. It includes the plastic insert and the chrome surround.

For 1954 Chevrolet Cars

This is a painted chrome hood ornament.

For 1949 Cars

This is a chrome and painted hood emblem for a 1950.

For 1950 Chevrolet Cars

This is a beaded rubber pad for the hood emblem to to the hood (2 pieces). These will protect your paint from chips and prevent rattles.

For 1950 Chevrolet Cars

This is a beaded rubber pad for the hood emblem to to the hood (2 pieces). It will protect your paint from chips and prevent rattles.

For 1953 Chevrolet Cars

This is a set of universal stainless steel hood locks.

For All Cars and Trucks

This is a set of 2 chrome hair pin clips left and right

For All Cars and Trucks

This is a chrome replacement 24 inch plastic covered lanyard. Sold as a package of 2.

For All Cars and Trucks

This is a package of 2 chrome scuff plates.

For All Cars and Trucks

This is a chrome replacement 3/16 inch flip over pin. Sold as a package of 2.

For All Cars and Trucks

This is a set of chrome hood pins with a 3/16 inch flip over pin style.

For All Cars and Trucks

This is a set of chrome hood pins with lanyards and hair pin style.

For All Cars and Trucks

Hood Hinge. Center of hood, galvanized steel. Need to grease hinges upon installation

For 1937 1938 Chevrolet Cars

This is hood hinge strip down the center of the hood. It's made of polished stainless steel. (You need to grease the pivot points upon installation).

For 1937 1938 Chevrolet Cars

These are hood hinges that are zinc plated for a long lasting nice finish. You will also need hood hinge bolts # 3689234 2 pair, and hood hinge gasket #3664013A

For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are the proper shouldered bolts for the hood hinges on 1940-54 passenger cars. The measurements are 1/2 inch hex head with a 3/8 inch shoulder. These are sold as a pair ...

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are the proper shouldered bolts for the hood hinges on 1940-54 passenger cars. The measurements are 5/8 inch hex head with a 7/16 inch shoulder. These are sold as a pair...

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are the proper shouldered bolts for the hood hinges. The measurements are 1/2 inch hex head with a 3/8 inch shoulder. These are sold as a pair and the car uses 2 pair.

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are the proper appearing shouldered bolts for the hood hinges but are made of stainless steel instead of plain steel. Never worry about rust again. The measurements are ...

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are the proper appearing shouldered bolts for the hood hinges but are made of stainless steel instead of plain steel. Never worry about rust again. The measurements are ...

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are the proper appearing shouldered bolts for the hood hinges but are made of stainless steel instead of plain steel. Never worry about rust again. The measurements are ...

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are hood hinge gaskets that are sold as a pair.

For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This clever hinge works perfectly on one piece Chevy car hoods from 1934 - 1940, Chevy trucks up to 1946, and many other applications as well. Two pieces of box tubing attach ...

For 1937 1938 1939 Chevrolet Cars and Trucks

This is a hood hinge repair pin to use when the holes for the bolts are worn out. Drill the base and arm for installation. Drill hole sizes: Base; 29/64" Arm; 5/16"

For 1949 1950 1951 1952 Chevrolet Cars

This classic bi-flector accessory attaches to the hood center strip and was designed to deflect the air to keep the windshield clear of bugs and snow. Includes stainless steel...

For All Cars and Trucks

These are fiberglass hood sides that are smooth. Sold as a pair. *NOTE* This item ships direct from manufacturer. Additional shipping charges apply. Please call for rates.

For 1937 Chevrolet Cars

These are fiberglass hood sides that are smooth. *NOTE* This item ships direct from manufacturer. Additional shipping charges apply. Please call for rates.

For 1938 Chevrolet Cars

These are fiberglass hood sides with a recessed scoop. Sold as a pair. *NOTE* This item ships direct from manufacturer. Additional shipping charges apply. Please call for rate...

For 1937 Chevrolet Cars

These are fiberglass hood sides that have a recessed scoop. Sold as a pair. *NOTE* This item ships direct from manufacturer. Additional shipping charges apply. Please call for...

For 1938 Chevrolet Cars

These are fiberglass hood sides that are smooth. *NOTE* This item ships direct from manufacturer. Additional shipping charges apply. Please call for rates.

For 1939 Chevrolet Cars

This is a fiberglass hood 1 piece top section. Handmade with three layers of 1.5 oz. fiberglass mat resulting in a part with consistent thickness and strength throughout. * Ha...

For 1937 Chevrolet Cars

This is a fiberglass hood 1 piece top section. Handmade with three layers of 1.5 oz. fiberglass mat resulting in a part with consistent thickness and strength throughout. * Ha...

For 1938 Chevrolet Cars

This is a fiberglass hood 1 piece top section. Handmade with three layers of 1.5 oz. fiberglass mat resulting in a part with consistent thickness and strength throughout. * Ha...

For 1939 Chevrolet Cars

This is a fiberglass hood. Handmade with three layers of 1.5 oz. fiberglass mat resulting in a part with consistent thickness and strength throughout. * Hand-rolled to remove ...

For 1941 Chevrolet Cars

This is a fiberglass hood. Handmade with three layers of 1.5 oz. fiberglass mat resulting in a part with consistent thickness and strength throughout. * Hand-rolled to remove ...

For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Developed for racers, the stock hood and hood sides have been integrated into one piece that can be lifted off as a single unit. Fits all 1939 Chevy passenger cars and sedan d...

For 1939 Chevrolet Cars

This is a fiberglass hood 1 piece top section. Handmade with three layers of 1.5 oz. fiberglass mat resulting in a part with consistent thickness and strength throughout. * Ha...

For 1940 Chevrolet Cars

This t-bolt retains rear center strip of hood.

For 1937 1938 Chevrolet Cars

This billet hood release handle has a satin finish. Designed for easy installation and removal. The cable can be unhooked from the handle without affecting adjustments. Comes ...

For All Cars and Trucks

This billet hood release handle has a polished finish. Designed for easy installation and removal. The cable can be unhooked from the handle without affecting adjustments. Com...

For All Cars and Trucks

This Billet hood and trunk release handles has a satin finish. Designed for easy installation and removal. The cables can be unhooked from the handles without affecting adjust...

For All Cars

This Billet hood and trunk release handles has a polished finish. Designed for easy installation and removal. The cables can be unhooked from the handles without affecting adj...

For All Cars

This is the hood latch cup that sits on top of the latch spring. It's made of stainless steel. The spring is sold separately as our part #3658835PS or #3658835S.

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 Chevrolet Cars

This is the hood latch cup that sits on top of the latch spring. It's made of polished stainless steel. The spring is sold separately as our part #3658835PS or #3658835S.

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 Chevrolet Cars

This is the spring for the hood latch that sits in the spring cup. The spring is made of stainless steel. The spring cup is sold separately as our part #3658835PC or #3658835C...

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 Chevrolet Cars

This is the spring for the hood latch that sits in the spring cup. The spring is made of polished stainless steel. The spring cup is sold separately as our part #3658835PC or ...

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 Chevrolet Cars

On cowl & radiator shell. Stainless

For 1939 Chevrolet Cars

These are the hood latches located on the cowl and radiator shell. Sold as a set of 4 pieces.

For 1937 1938 Chevrolet Cars

This is a stainless steel latch bolt with a adjustable upper.

For 1940 1941 Chevrolet Cars

This is a stainless steel latch bolt with a adjustable upper.

For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is a polished stainless steel latch bolt with a adjustable upper.

For 1940 1941 Chevrolet Cars

This is a polished stainless steel latch bolt with a adjustable upper.

For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is a stylish chrome Latch Release systems give you an easy way to release with latch-based function. Easy installation allows you to quickly and effectively install. Auto...

For All Cars and Trucks

This is a stylish chrome latch release systems give you an easy way to release with latch-based function. Easy installation allows you to quickly and effectively install. Auto...

For All Cars and Trucks

This is a 6 piece set of clips that does the one moulding.

For 1937 Chevrolet Cars

These hood moulding bolts and clips for one center moulding.

For 1938 Chevrolet Cars

These hood moulding clip / bolts for one side moulding, except 38 Convertible.

For 1938 1939 Chevrolet Cars

This is the hood side mouldings for a 1939. (uses 8 per car).

For 1939 Chevrolet Cars

This is a hood side moulding for the center (uses 2 per car).

For 1938 Chevrolet Cars

These are the upper and lower hood side mouldings for a '38. (uses 4 per car) Sold individually. (clips not available!)

For 1938 Chevrolet Cars

These are the hood side mouldings for a 1939. They are laser cut, polished stainless steel. Sold in pairs.

For 1939 Chevrolet Cars

This is the name plate for the side of the hood that says "Master 85'. Sold individually. 6-5/8 inches total length 3/8 inch total height

For 1939 Chevrolet Cars

This is a hood side name plate that says "Master Deluxe". Sold individually. 7-3/16 inches total length 5/16 inch total height

For 1939 Chevrolet Cars

This is the Chevrolet hood side emblem for 49-52.

For 1949 1950 1951 1952 Chevrolet Cars and Trucks

These are the hood side name plates that say "Fleetmaster". Sold in pairs.

For 1947 1948 Chevrolet Cars

These are the hood side name plates that say "Fleetline". Sold in pairs.

For 1947 1948 Chevrolet Cars

These are the hood side name plates that say "Stylemaster". Sold in pairs.

For 1947 1948 Chevrolet Cars

This is the rubber gasket for between the hood and the hood ornament. It prevents paint chips and rattles.

For 1947 1948 Chevrolet Cars

This is the rubber gasket for between the hood and the hood ornament. It prevents paint chips and rattles.

For 1949 1950 Chevrolet Cars

This is the rubber gasket for between the hood and the hood ornament. It prevents paint chips and rattles.

For 1951 1952 Chevrolet Cars

This is the rubber gasket for between the hood and the hood ornament. It prevents paint chips and rattles.

For 1953 1954 Chevrolet Cars

This is a beautiful chrome '38 hood ornament.

For 1938 Chevrolet Cars

This is a beautiful chrome '40 flying lady hood ornament that was an accessory. The plastic insert is included.

For 1940 Chevrolet Cars

This is a beautiful chrome '41 flying lady hood ornament. The plastic insert is included.

For 1941 Chevrolet Cars

This is a beautiful chrome '54 flying bird hood ornament. (Will also work on a 1953 but it's not original) It's a superior quality reproduction! Add matching fender top orname...

For 1953 1954 Chevrolet Cars

This is a beautiful chrome '50 flying bird hood ornament that was an accessory.

For 1950 Chevrolet Cars

This is a beautiful chrome '37 hood ornament that was an original accessory.

For 1937 Chevrolet Cars

This is a beautiful chrome '53 flying bird hood ornament that was an accessory.

For 1953 Chevrolet Cars