101 Items Found
Showing 1 thru 100
First PagePrevious Page Page: 12 Next PageLast Page

A-Arm Adjusters
CHEVROLET Adjusters - 5/8" Straight With 1/2" Sleeve - Polished
Part #
13271
$44.00 Each

This 5/8 inch right hand straight angled adjuster with 1/2 inch sleeve is for GM cars only. Polished (Show finish) for suspension A-arms.

For All Chevrolet Cars and Trucks

CHEVROLET Adjusters - 5/8" Multi Angle With 1/2" Sleeve - Polished
Part #
13270
$71.00 Each

This 5/8 inch right hand multi angle adjuster with 1/2 inch sleeve is for GM cars only. Polished (Show finish) for suspension A-arms.

For All Chevrolet Cars and Trucks

Front Lowering Kit
CHEVY 1949-54 Chevy Dropped Steering Arms For Original IFS, Required With Dropped Uprights
Part #
CSA4954
$190.00 Left & Right

1949-54 Chevy dropped steering arms for the original IFS required with the dropped uprights

For 1949 1950 1951 1952 1953 1954 Chevy Cars

CHEVY 1949-54 Chevy Dropped Uprights For Original IFS
Part #
CDU4954
$405.00 Left & Right

1949-54 Chevy dropped uprights for the original IFS, 2 1/2" drop on '49-'52, 2" drop on '53-'54, dropped steering arms CSA4954 required. Will accept stock drum brake...

For 1949 1950 1951 1952 1953 1954 Chevy Cars

Inner Shaft
CHEVROLET A-Frame, Inner Shaft -Upper . Fits Passenger Cars & 53-62 Corvette
Part #
3693693 49-54
$56.00 Each

This is the inner shaft for the upper A-frame on 1949-54 cars and 1953-62 Corvette.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET A-Frame, Inner Shaft, Lower -1949-54 Cars & 1953-62 Corvette
Part #
3693459 49-54
$90.00 Each

This is the inner shaft for the lower A-frame on 1949-54 cars and 1953-62 Corvette.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET A-Frame, Inner Shaft, Lower -Left Side With Seals
Part #
605003 39-48
$150.00 Each

This is the lower inner shaft for the left A-frame with seals. (driver's side)

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

CHEVROLET A-Frame, Inner Shaft, Lower -Right Side With Seals
Part #
605004 39-48
$150.00 Each

This is the lower inner shaft for the right A-frame with seals. (passenger's side)

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Link Pin -Upper A-Frame
CHEVROLET Link Pin -Lower Outer With Seals. 1939-54 Cars & 1953-62 Corvette
Part #
3690683 39-54
$36.75 Each

This is the lower outer link pin with seals. It fits 1939-54 passenger cars and 1953-62 Corvette.

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET Link Pin -Upper Outer With Seals. 1949-54 Cars & 53-62 Corvette
Part #
3690684 49+54
$39.50 Each

This is the upper outer link pin with seals. It fits 1949-54 passenger cars and 1953-62 Corvette.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET Link Pins -Upper, Outer With Seals
Part #
603412 39-48
$64.25 Each

This is the upper outer link pin with seals that fits 1939-48 cars.

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Seals -Link Pin
CHEVROLET Link Pin Seals -Lower Outer. Also Fits 53-62 Corvette (4 Pieces)
Part #
599199 39-54
$6.00 Set

These are the link pin seals for the lower outer on 1939-54 passenger cars & 1953-62 Corvette. (4 pieces) The outside diameter is 1-1/8 inches.

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET Link Pin Seals -Upper Outer-1949-54 cars and 1953-62 Corvette
Part #
599180 49^54
$20.25 Set

These are the link pin seals for the upper outer on 1949-54 passenger cars and 1953-62 Corvette (4 pieces)

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET Link Pin Seals -Upper Outer
Part #
599191 39-48
$26.00 Set

These are the seals for the upper outer link pins. (4 pieces)

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Seals-Inner Shaft
CHEVROLET A-arm Seals -Inner Shaft, Lower A-Frame 1939-54 cars & 53-62 Corvette (4 Pcs)
Part #
599180 39^54
$20.25 Set

These are the seals for the inner shaft on the lower A-arms for 1939 passenger cars and 1953-62 Corvette (4 pieces)

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

Spindle Nut & Washer
Dust Cover, Spindle Nut, Washer & Lock Pin For Mustang II
Part #
378137M ALL+
$10.50 SET

This is the nut, washer and lock pin for Mustang II / Pinto spindles (does 2 spindles).

For All Cars

Bushing Shock
CHEVROLET Shock Link Bushing, Double Action
Part #
043816 33^55
$8.00 Set

These are rubber bushings for the shock link on a double action shock.

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars

CHEVROLET Shock Link Bushing (Rubber) For Front, Beam Axle
Part #
041133 30^38
$8.75 Pair

This is a rubber shock link bushing for an I-beam axle. (2 pieces)

For 1930 1931 1932 1933 1934 1935 1936 1937 1938 Chevrolet Cars

CHEVROLET Shock Bushings, Rubber With Washers & Nuts (8 Sets)
Part #
3708378 49^57
$32.00 Set

These are the 8 rubber bushings, 8 washers and 4 nuts for the shock absorbers.

For 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars

Independent Front Suspension
CHEVROLET Corvette (C4) Front Suspension Urethane Bushing Kit
Part #
SUSCORFBUSH
$150.00 Set
Click for more details

Urethane Bushing Kit for Corvette Front Suspension.

For All Chevrolet Cars and Trucks

CHEVROLET Corvette (C4) Front and Rear Suspension Urethane Bushing Kit
Part #
SUSCORFRBUSH
$300.00 Set
Click for more details

Chevy Corvette front and rear suspension bushing kit that lets you upgrade worn and crumbling rubber bushings that dampen vibrations at mounting points for front upper and low...

For All Chevrolet Cars and Trucks

C5 Corvette Suspension Conversion
CHEVROLET Shock Mount, Lower Front For C5 Conversion Setups
Part #
C5SHOCKLMF
$200.00 Pair

These are the lower shock mounts on the lower control arm for the C5 Corvette suspension conversion.

For All Chevrolet Cars

CHEVROLET Suspension Conversion Crossmember, Corvette C5 (97-04) to 1939-48 Chevy Car
Part #
C5CONV 39-48
$895.00 Each
Click for more details

This is a C5 Corvette suspension conversion. Fits 1939-48 Chevy Car & Sedan Delivery (except straight axle cars) This is a bolt on front crossmember that uses your C5 suspensi...

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

CHEVROLET Conversion Crossmember, Corvette C5 (97-04) For 1949-54 Chevy Car Suspension
Part #
C5CONV 49-54
$905.25 Each
Click for more details

This is a C5 Corvette suspension conversion. Fits 1949-54 Chevy Car & Sedan Delivery. Also fits 1953-1962 Corvette. This is a bolt on front crossmember that uses your C5 suspe...

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET Components For C5 Conversion For Chevrolet Car (Less Crossmember and Rack & Pinion)
Part #
C5COMP 39-48
$3015.00 Each

Don't have a donor C5 Corvette? We've put together all the components for a front C5 conversion in a kit. Complete with factory nuts/bolts to put it together. Does not include...

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET Conversion Crossmember And All Components For C5 Conversion For Chevrolet Car
Part #
C5 CONV 39-48
$3995.00 Each

Corvette suspension and brakes - The ultimate! If you don't have a donor C5 Corvette, we've put together all the components for a front C5 conversion in a kit. Complete with f...

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

CHEVROLET All Components And Crossmember For C5 Conversion For Chevrolet Car
Part #
C5 CONV 49-54
$3995.00 Each

Corvette suspension and brakes - The ultimate! Don't have a donor C5 Corvette? We've put together all the components for a front C5 conversion in a kit. Complete with factory ...

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

Heidts IFS Components - Mustang II Spindle
Spindles - Mustang II, Steel. 2" Dropped
Part #
SP-101
$206.00 PR

Spindle. Mustang II. 2" drop. 1045 heat-treated alloy steel. Uses all stock rotors, bearings, calipers, etc. making it easy to install. Retains stock factory geometry. Al...

For All Cars and Trucks

Spindles - Mustang II, Steel. Stock Height
Part #
MP-028
$206.00 PR

Spindle. Mustang II. Stock height. 1045 heat-treated alloy steel. Uses all stock rotors, bearings, calipers, etc. making it easy to install. Retains stock factory geometry. Al...

For All Cars and Trucks

IFS Components Package
Suspension Components Package, Front -Mustang Ii/ Pinto With Tubular Steel A-Arms For 1937-48 Chevy Car
Part #
IF-7480HH
$1499.00 SET
Click for more details

This is a Mustang II/ Pinto front suspension component package for 37-48 Chevy cars. The kit comes with tubular steel upper and lower A-Arms. This complete hub-to-hub kit Incl...

For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars

Suspension Components Package, Front -Mustang Ii/ Pinto With Tubular Steel A-Arms For 1949-54 Chevy Car
Part #
IF-7480TW
$1499.00 SET
Click for more details

This is a Mustang II/ Pinto front suspension component package for 1949-54 Chevy cars. The kit comes with tubular steel upper and lower A-Arms. This complete hub-to-hub kit In...

For 1949 1950 1951 1952 1953 1954 Cars

Front Suspension Components Package. Mustang Ii/ Pinto With Tubular Polished, Stainless A-Arms For 1937-48 Chevy Car & 37-54 Chevy Truck
Part #
IF-7480HHS
$2275.00 SET
Click for more details

Mustang II/ Pinto front suspension component package for 37-48 Chevy Cars & 37-54 Chevy Trucks. Kit with polished, stainless tubular upper & lower A-Arms. **NOTE: 49-54 Chevy ...

For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars and Trucks

IFS Mustang II Kit - Weld In
Suspension Kit. Heidts Weld In, Tubular A-Arms Without Crossmember
Part #
HEIDTSIFS02
$1585.00 KIT
Click for more details

Suspension kit. Heidt's weld-in tubular A-arms without crossmember. Includes plain tubular upper and lower, full width A-arms. All packages include: 11" five lug rotors; ...

For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars and Trucks

Suspension Kit. Heidts Weld In, Tubular A-Arms With Crossmember
Part #
HEIDTSIFS01
$2093.50 KIT
Click for more details

Suspension kit. Heidt's weld-in tubular A-arms with crossmember. Includes plain tubular upper and lower full width A-arms. All packages include: 11" five lug rotors; bear...

For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars and Trucks

IFS Superide II Kit
CHEVROLET Suspension Kit. Heidts Weld In, Superide Ii, 40-48 Chev Car
Part #
BX213
$2999.00 KIT
Click for more details

This is a Heidt's weld-in IFS front suspension kit. It's a Superide II for 1940-48 Chevy car. Contents of kit: - TIG welded main crossmember for maximum strength & great looks...

For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

CHEVROLET Suspension Kit, Front -Heidts Weld In, Superide Ii, 37-39 Chev Car
Part #
BX212
$3369.00 KIT
Click for more details

This is a Heidt's weld-in IFS front suspension kit. It's a Superide II for 1937-39 Chevy car. Contents of kit: - TIG welded main crossmember for maximum strength & great looks...

For 1937 1938 1939 Chevrolet Cars

Sway Bar
Sway Bar Bracket Kit. For Tubular Full Lower A-Arms - Stainless Steel
Part #
SB-012-SS
$87.00 SET

Bracket kit. for use with heidts tubular full lower a-arms

For All Cars and Trucks

Sway Bar-Front
CHEVROLET Sway Bar-Front Mounting Brackets. Chassis Engineering Ifs Kit, 49-54 Car
Part #
AU-1054PM
$32.00 Set

These are sway bar mount brackets for Chassis Engineering IFS kit.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

King Pins
CHEVROLET King Pins -Dubonnet Shock Suspension (Knee Action) 1934-38
Part #
603963 34-38
$80.00 Pair

This is a kingpin kit for Dubonnet style independent front suspension equipped cars. (with lever or knee action shocks) bushing OD 1.055" pin dia. 0.865" pin length ...

For 1934 1935 1936 1937 1938 Chevrolet Cars

CHEVROLET King Pin -(Knee Action Shock Equipped) 1939-54 Cars & 1953-62 Corvette
Part #
599207 39/54
$89.00 Pair

This is a kingpin set for knee action shock suspensions 1939-54 and 53-62 Corvette. Pins are .866" OD x 5.31" long

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET King Pins -Straight Axle 1937-40
Part #
602690 37^40
$97.75 Pair

This is a kingpin set for a 1937-40 straight axle car.. Kingpin size = 5.19 inches in length x .732 inch outside diameter. Bushing = .919 inch outside diameter.

For 1937 1938 1939 1940 Chevrolet Cars

CHEVROLET King Pins -Straight Axle (Except CC, DC, EC & FC)
Part #
602691 29^36
$137.50 Pair

This is a kingpin kit for straight axle cars (except models CC, DC, EC & FC)

For 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars

Dubbonett Rebuild Service
CHEVROLET Shock Absorber Rebuild Service For Dubonnet Shocks
Part #
602499 34-38
$700.00 Each

This is a rebuild service for your stock Dubonnet style shock absorbers. This will let you keep your suspension all original.

For 1934 1935 1936 1937 1938 Chevrolet Cars

Front End Rebuild kit
CHEVROLET Front End Rebuild Kit, Deluxe -1949-54 Chevy Car
Part #
FEK4954
$400.00 Kit

This is our deluxe front end rebuild kit. Rebuild your steering and suspension system to put new car handling back in your car. Deluxe kit includes: 4 Outer Pin Kits Inner Sha...

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET Front End Rebuild Kit, Deluxe -1939-48 Chevy Car
Part #
FEK3948
$400.00 Kit

This is our deluxe front end rebuild kit for knee action front ends. Rebuild your steering and suspension system to put new car handling back in your car. Deluxe kit includes:...

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Bumper (A-Frame)
CHEVROLET Bump Stop -Upper A-Frame. Also Fits 53-56 Corvette
Part #
1298323 39-54
$15.00 Set

These are the rubber bumpers or bumpstops for the upper A-frame. They have 1-3/4 inch overall height. Also fits 1953-56 Corvette (2 pieces included)

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET Bump Stop -Lower A-Frame, Bolt-In. Also Fits 53-62 Corvette
Part #
3687669 41-54
$15.00 Set

These are the rubber bumpers or bumpstops for the lower A-frame that are a bolt-in type. 2" high x 5" dia. & rubber height 1-3/4". (2 pieces included)

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET Bump Stop -Lower A-Frame (Snap-In Type)
Part #
3658602 39-41
$25.00 Pair

These are the rubber bumpers or bumpstops for the lower A-frame that are a snap-in type. (2 pieces included)

For 1939 1940 1941 Chevrolet Cars

CHEVROLET Bump Stop -Lower A-Frame, Bolt-In. Also Fits 53-62 Corvette
Part #
3687669E 41-54
$32.25 Each

These are the rubber bumpers or bumpstops for the lower A-frame that are a bolt-in type. 2-3/4 inches in height and a 2 inch diameter. 1/2 inch thread length. Also fit 1953-62...

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET Bump Stop -Upper A-Frame. Also Fits 53-56 Corvette
Part #
1298323E 39-54
$43.75 Set

These are the rubber bumpers or bumpstops for the upper A-arms. They have an overall height of 2 inches. Also fit 1953-56 Corvette (2 pieces included).

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

Bumper -Axle
CHEVROLET Bump Stop, Rubber -For Straight Axle
Part #
593915 36^38
$28.25 Pair

These are the rubber bump stops for the front I beam axle that prevent it form bottoming out. (2 pieces)

For 1936 1937 1938 Chevrolet Cars

CHEVROLET Bump Stop -Front Axle,(Kb & Jb) (Exchange)
Part #
350251 39-40
$77.75 Pair

We rebuild yours! These are the rubber bumpers or bumpstops for the front axle. They fit models KB & JB.

For 1939 1940 Chevrolet Cars

Air Ride Compressor System
Air Suspension, Compressor, Controller -Complete 4 Way Ridepro E 4 Way System,
Part #
ARC-4000E
$1495.00 Set

This is a front air suspension minus the bags. It's a complete 4 way RidePro compressor system with new RidePro controller. The kit includes the compressor, a 3 gallon tank, 4...

For All Cars and Trucks

Airbags
Airbag, 2600 lb , 1/2" Ports. 2 Top Holes, One Bottom Hole
Part #
AIRBAG2600
$59.00 EA

This is a 2600 pound airbag. It has 1/2 inch ports, 2 top holes for mounting that are 2-3/4 inches center-to-center and 1 bottom hole. Built specifically for automotive suspen...

For All Cars and Trucks

2500lb Airbag, 1/2" Ports. 2 Top Holes, One Bottom Hole
Part #
AIRBAG2500
$59.00 EA

2500lb airbag. 1/2" ports, 2 top holes (1-3/4" center-to-center) & 1 bottom hole. Built specifically for automotive suspensions rather than machine or industrial app...

For All Cars and Trucks

2500lb Airbag, 1/2" Ports. 2 Top Holes, One Bottom Hole - Denominator-Ii
Part #
AIRBAG25002
$79.00 EA

DeNominator II 2500lb airbag, 600psi. 1/2" ports, 2 top holes (1-3/4" center-to-center) & 1 bottom hole. Built specifically for automotive suspensions rather than ma...

For All Cars and Trucks

Airbag, 2600 lb , 1/2" Ports. 2 Top Holes, One Bottom Hole - Denominator Ii
Part #
AIRBAG26002
$79.00 EA

The DeNominator II is a 2600 pound airbag, 500 psi. 1/2" ports, 2 top holes for mounting that are 2-3/4 inches center-to-center and 1 bottom hole. Built specifically for ...

For All Cars and Trucks

AirWave Shocks
Airwave 2500lb Non Adjustable, Built In Shock
Part #
AIRWAVE00
$600.00 PR
Click for more details

These are a non-adjustable built-in shock and bag. 2500lb 6-1/4" dia. Built to your specifications. Just provide us with the following information: Air shock length, open...

For All Cars and Trucks

Airwave 2500lb 10 Position Adjustable, Built In Shock
Part #
AIRWAVE01
$750.00 PR
Click for more details

These are a 10 position adjustable built-in shock and bag. 2500lb. 6-1/4 inches diameter. Built to your specifications. Just give us the following information: Air shock lengt...

For All Cars and Trucks

Basic Air Bag Kit
Air Bag Suspension Kit. Complete Basic Kit (Now Includes 3/4 Hp Compressor)
Part #
AIRBAGKIT01
$1150.00 Set

This kit has now been upgraded to include 3/4hp compressor. Complete kit to install air bag suspension. UNBEATABLE DEAL!

For All Cars and Trucks

Complete Air Bag Kit
CHEVROLET Suspension Complete Air Bag Kit, Includes 3/4hp Compressor. Plug & Play
Part #
AIRBAGKIT02
$1465.00 EA

This is our signature series plug and play air management system. Same as our basic air suspension kit but with self-contained box prewired, ready to go with 3/4 horse compres...

For All Chevrolet Cars and Trucks

Digital Gauges (Dakota Digital)
Air Ride Monitor Gauge, 0-150 Psi With 3 Senders
Part #
AR1503
$270.00 Set
Click for more details

Digital Guages (Dakota Digital). Air ride gauge with 3 senders, use for front/ rear plus tank applications. Choice of either Blue or Teal display. Machined aluminum bezel and ...

For All Cars and Trucks

Air Ride Monitor Gauge, 0-150 Psi With 4 Senders
Part #
AR1504
$270.00 Set
Click for more details

Digital Guages (Dakota Digital). Air ride gauge with 4 senders, use for all 4 corner applications. Choice of either Blue or Teal display. Machined aluminum bezel and housing w...

For All Cars and Trucks

Air Ride Monitor Gauge, 0-400 Psi (High Pressure) With 2 Senders
Part #
AR4002
$300.00 Set
Click for more details

Digital Guages (Dakota Digital). Air ride gauge with (2) 400 psi senders. Use for front/rear applications. Choice of either Blue or Teal display. Machined aluminum bezel and h...

For All Cars and Trucks

Air Ride Monitor Gauge, 0-400 Psi (High Pressure) With 3 Senders
Part #
AR4003
$300.00 Set
Click for more details

Digital Guages (Dakota Digital). Air ride gauge with (3) 400 psi senders. Use for front/ rear and tank applications. Choice of either Blue or Teal display. Machined aluminum b...

For All Cars and Trucks

Air Ride Monitor Gauge, 0-150 Psi With 5 Senders
Part #
AR1505
$310.00 Set
Click for more details

Digital Guages (Dakota Digital). Air ride gauge with 5 senders, use for all 4 corner plus tank applications. Choice of either Blue or Teal display. Machined aluminum bezel and...

For All Cars and Trucks

Air Ride Monitor Gauge, 0-400 Psi (High Pressure) With 4 Senders
Part #
AR4004
$360.00 Set
Click for more details

Digital Guages (Dakota Digital). Air ride gauge with (4) 400 psi senders. Use for 4 corner applications. Choice of either Blue or Teal display. Machined aluminum bezel and hou...

For All Cars and Trucks

Grease Fitting
CHEVROLET Grease Zerk Fitting -1/8" National Pipe Thread, Straight
Part #
191758 ALL
$1.75 Each

This is a grease fitting that is 1/8 inch national pipe with a straight inlet.

For All Chevrolet Cars and Trucks

CHEVROLET Grease Zerk Fitting -1/4" X 28 Taper Thread, 90 Degree
Part #
110347 ALL
$1.75 Each

This is a grease fitting that is 1/4 inch x 28 taper thread with a 90 degree inlet.

For All Chevrolet Cars and Trucks

Plastic Block
CHEVROLET Harmonic Balancer, Engine Mock Block Replica. Chevy BB,
Part #
PAP-2125
$35.00 Each

This is a Chevy big block harmonic balancer made of plastic for mock block engines. Steel inserts allow you to bolt on actual parts. Great for engine and chassis setup, garage...

For All Chevrolet Cars and Trucks

CHEVROLET Engine Harmonic Balancer, Mock Block Replica Engine. Chevy SB
Part #
PAP-2041
$45.00 Each

This is a Chevy small block harmonic balancer made of plastic for mock block engines. Steel inserts allow you to bolt on actual parts. Great for engine and chassis setup, gara...

For All Chevrolet Cars and Trucks

CHEVROLET Engine, Mock Block Replica Engine. Chevy SB, Short Block
Part #
PAP-2021
$300.00 Each

This is a Chevy small block, short block (without cylinder heads). It's a plastic engine that is to scale. It has steel inserts that allow you to bolt on actual parts such as ...

For All Chevrolet Cars and Trucks

CHEVROLET Engine, Mock Block Replica Engine. Chevy SB, Long Block
Part #
PAP-2020
$349.25 Each

This is a Chevy small block, long block (with cylinder heads). It's a plastic engine that is to scale. It has steel inserts that allow you to bolt on actual parts such as valv...

For All Chevrolet Cars and Trucks

CHEVROLET Engine, Mock Block Replica Engine. Chevy BB, Long Block
Part #
PAP-2120
$400.00 Each

This is a Chevy big block, long block (with cylinder heads). It's a plastic engine that is to scale. It has steel inserts that allow you to bolt on actual parts such as valve ...

For All Chevrolet Cars and Trucks

CHEVROLET Engine, Mock Block Replica Engine, Chevy BB, Short Block
Part #
PAP-2121
$400.00 Each

This is a Chevy big block, short block (without cylinder heads) It's a plastic engine that is to scale. Steel inserts allow you to bolt on actual parts such as valve covers, e...

For All Chevrolet Cars and Trucks

Seal Kit
CHEVROLET Shock Absorber Seal Kit -Does 1 Dubbonette (Knee Action) Shock
Part #
592431B 34-38
$70.00 Each

This is a seal kit that does 1 Dubbonette knee action shock.

For 1934 1935 1936 1937 1938 Chevrolet Cars

Shock Absorber Fluid
CHEVROLET Shock Absorber Fluid
Part #
603489S ALL^
$8.25 Quart

Shock Absorber Fluid.

For All Chevrolet Cars and Trucks

Shock Bracket
CHEVROLET Shock Absorber Bracket -Lower
Part #
3688548 49-54
$16.00 Each

This is a lower shock bracket for 1949-54.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

Shock Link
CHEVROLET Shock Link -8", 30-33 Passenger Cars (Except CC)
Part #
043031A 30-39
$20.00 Each

This is a lower shock link for 1930-39 that measures 8 inches overall. Does not fit CC models.

For 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars

CHEVROLET Shock Link (6-3/4") FC, GB, HB With Beam Axle
Part #
5302451A 36-46
$20.00 Each

This is a shock link that measures. 6-3/4 inches. Fits FC, GB and HB models with a beam axle. (1 side of link must be sized for tight fit)

For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars

Shocks & Bushings
CHEVROLET Shock Absorbers -Front (Jb & Kb Beam Axle)
Part #
5513851 39+40
$62.00 Set

This is a set of gas shocks for the front of JB & KB models with a beam axle. (sold in pairs)

For 1939 1940 Chevrolet Cars

CHEVROLET Shocks -Front
Part #
5531205 49-54
$100.00 Set

This is a set of 1949-54 car front shock absorbers. Attributes: Lower Mount : Stem 3/8" x 16 Shock Compressed Length : 8.5" Shock Dust Shield : No Shock Extended Len...

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET Shock Absorber for 1937-38 (Except GA and HA models) Left $75 Core
Part #
5307486 37-38
$162.00 Each

This is a left shock for 1937-38 except models GA & HA, 1201A.

For 1937 1938 Chevrolet Cars

CHEVROLET Shock Absorber (Except GA and HA) Right -$75 Core
Part #
5307487 37-38
$162.00 Each

This is a right shock for 1937-38 except models GA & HA, right, 1201B.

For 1937 1938 Chevrolet Cars

CHEVROLET Shock Absorber, Left -(Except JB & Kb models) ($100 Core)
Part #
5352102 39-48
$225.00 Each

This is a left shock absorber for 1939-48 except JB, KB and 2200A models.

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

CHEVROLET Shock Absorber, Right -(Except JB & Kb models) ($100 Core)
Part #
5352103 39-48
$225.00 Each

This is a right shock absorber for 1939-48 except JB, KB and 2200A models.

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

CHEVROLET Shock Absorbers (Except GA, HA). $150/ Pair Core
Part #
5307486B 37^38
$324.00 Left & Right

Shocks for 1937-38. except GA & HA, 1201A, 1201B models

For 1937 1938 Chevrolet Cars

CHEVROLET Shock Absorbers For 1939-48 (Except JB, KB models) =$200/ Pair Core
Part #
5352102B 39^48
$450.00 Left & Right

This is a pair of rebuilt shocks for 1939-48 except models JB, KB, 2200A, 2200B

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Coil Springs
CHEVROLET Coil Springs (Except Powerglide & 49-52 Convertible)
Part #
3694612 39-52
$124.50 Pair

This is a pair of coil springs that fit all IFS cars from 1939-52 except for Powerglide equipped cars and 1949-52 convertibles.

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars

CHEVROLET Coil Springs - Fits 1953-54 W/Powerglide & 1949-52 Convertible
Part #
3664086 49-54
$127.50 Pair

This is a pair of coil springs that fit all 1953-54 cars and Powerglide equipped 1949-52 Convertible.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

Front Leaf Spring Bolt
CHEVROLET Bolt -Leaf Spring Center, 2 Pieces (Except Utility)
Part #
1288224 ALL
$3.25 Set

Leaf spring locator center bolt (except utility vehicle) (2 pieces).

For All Chevrolet Cars and Trucks

Rubber Seals
CHEVROLET Seals -Rubber For Steel Bushed Shackles (8 Pieces)
Part #
593705 34-54
$13.50 Set

These are rubber shackle seals for steel bushed shackles (8 pcs).

For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

Shackle Rebuild Kit
CHEVROLET Shackle Rebuild Kit -4 Pins, 4 Bushings, 8 Seals -Front or Rear
Part #
373199B 34^54
$70.00 Set

This is a shackle rebuild kit. Steel bushed with 4 pins, 4 bushings and 8 seals for the front or rear.

For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

Teflon Liner
CHEVROLET Liner- Teflon (Leaf Springs) 20'
Part #
3699910T 37-54
$62.75 Set

This is a roll of teflon liner for 2 leaf springs. 1-3/4" wide x. 20 feet long

For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

Sway Bar Bushing
CHEVROLET Sway Bar Shaft-Bushing-Straight Axle
Part #
3501467 39^40
$17.50 Set

These sway bar bushings are for the Sway bar shaft straight axle use 2 sets (2 piece set)

For 1939 1940 Chevrolet Cars

CHEVROLET Sway Bar Shaft-Bushing (Steel Bushed Rubber)
Part #
350146 39^40
$20.00 Pair

These sway bar bushings are for the sway bar shaft cars with staight axle use with #3501467

For 1939 1940 Chevrolet Cars

CHEVROLET Sway Bar Shaft-Bushing (Except Straight Axle)
Part #
599430 39-54
$25.00 Pair

These sway bar bushings are for the sway bar shaft except straight axle (2 pieces)

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET Sway Bar-Bushings Link, Rubber With Washers & Nuts (8 Sets)
Part #
3708378 39^54
$32.00 Set

These are rubber sway bar bushings for sway bar links 8 washers and nuts except cars with straight axle

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

CHEVROLET Sway Bar To Frame Bushings
Part #
599741 39-40
$50.00 Pair

These are sway bar to frame rubber bushings at end of sway bar shaft on the axle that fits models JB & KB (2 pieces)

For 1939 1940 Chevrolet Cars

Sway Bar Link Kit
CHEVROLET Sway Bar-Link Kit For (Except Cars With Straight Axle) 2 Pieces
Part #
599432 39/54
$16.50 Set

These are link kit for sway bar except cars with straight axle (2 pieces).

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

101 Items Found
Showing 1 thru 100
First PagePrevious Page Page: 12 Next PageLast Page

TOP