This is a billet aluminum, swivel thermostat housing. It turns a full 360 degrees. Superior, leak free operation. The dual Buna N o-rings ensure a positive seal to the manifol... For All Cars and Trucks

This is a billet aluminum, swivel thermostat housing. It turns a full 360 degrees. Superior, leak free operation. The dual Buna N o-rings ensure a positive seal to the manifol... For All Cars and Trucks

This is a billet aluminum, swivel thermostat housing. It turns a full 360 degrees and is pointed 15 degrees up. Superior, leak free operation. The dual Buna N o-rings ensure a... For All Cars and Trucks

This is a billet aluminum, swivel thermostat housing. It turns a full 360 degrees and is pointed 45 degrees up. Superior, leak free operation. The dual Buna N o-rings ensure a... For All Cars and Trucks

This is a 160 degree thermostat. Don't make the mistake of running no thermostat or your cooling system won't work properly. For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

This is a 180 degree thermostat. Don't make the mistake of running no thermostat or your cooling system won't work properly. For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

This is the gasket for the thermostat housing. (gooseneck, water neck). For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars and Trucks

This is the gasket for the water neck (outlet) to the cylinder head. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks

This is the brass bushing that goes in the head to reduce the size of the threads to accept the fitting for the temperature gauge. Tested to fit correctly on our 216ci display... For 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks

This is a water pump with a short (narrow) pulley and shaft (Cast Iron). For use on 1955 and later 235ci and 261ci engines. Includes gasket. This has a 3/8" wide pulley. For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

When placing in a 1955-1962 Chevrolet 235 or 261 inline six cylinder engine in a 1954 or older truck some do not want a modified short shaft low position water pump. If you pr... For All Chevrolet Cars and Trucks

This is a rebuilt water pump that comes with the gasket and pulley. For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars and Trucks

This is the water pump to rear cover plate gasket. For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

This is the gasket for the water pump to the engine block. For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

This fan has a black finish. It fits 1937-40 GA, HA, KH models and 1941-54 passenger car. It measures 15.5" blade tip to tip. It has a 1 inch center hole. The bolt holes ... For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

This is the fan belt for the generator. Fits: 1937-1952 All, 1953-1955 Utility (1st series) (except 261ci). 42-1/2" O.D. X 11/16" wide Note: Also used on 1954 commer... For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars and Trucks

This is a mounting kit for fan shrouds. For All Cars and Trucks

This is a chrome fan shroud that is 3 inches wide and has a 20 inch diameter. It includes the mounting hardware. For All Cars and Trucks

This is a chrome fan shroud that is 5 inches wide and has a 20 inch diameter. For All Cars and Trucks

This is a 1-3/4" adapter kit with 1-1/2 inch and 1-1/4 inch reducers and 2 clamps for the radiator hose. For All Cars and Trucks

This is a 12 inch long corrugated stainless steel radiator hose kits with chromed aluminum end caps. The hose can be bent to fit your application. For All Cars and Trucks

This is a 24 inch long corrugated stainless steel radiator hose kits with polished aluminum end caps. The hose can be bent to fit your application. 2- Polished end caps 1- 24&... For All Cars and Trucks

This is a 36 inch long corrugated stainless steel radiator hose kits with chromed aluminum end caps. The hose can be bent to fit your application. For All Cars and Trucks

This is a chrome radiator overflow tank with a sight tube. The tank measures 3 inches x 9 inches and has a 24 oz. capacity. Comes with a red anodized cap, drain plug and inclu... For All Cars and Trucks

Aluminum Water Pump Fitting - 1/2" NPT to 3/4" Barb For All Cars and Trucks

This is a steel water pump fitting for the heater hose. The threads are 1/2 inch National Pipe Thread on one end and it has a 3/4 inch barb on the other. For All Cars and Trucks