This is felt sound deadener with the original waffle pattern. It's used on door skins, roofs, etc. 3/32 of an inch thick x 3 feet x 8 feet. For All Chevrolet Cars and Trucks

This is felt sound deadener with the original waffle pattern. It's used on door skins, roofs, etc. 1/8 of an inch thick x 3 feet x 8 feet. For All Chevrolet Cars and Trucks

Insulation Pad W/ Gasket. Trans cover, die cut For 1940 Chevrolet Cars

This is a front floor mat for your 1941-48. Taupe color w/ carpet inserts and pad. Dimensions : Front 42-1/2" wide Back 56-1/4" wide Front to back 36-1/2" long For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is a floor mat for the front of your 1937-39 that has a Fischer body emblem. For 1937 1938 1939 Chevrolet Cars

These are brake and clutch pedal pads made of black rubber like original. Includes 2 pieces. For 1953 1954 Chevrolet Cars

These are brake and clutch pedal pads made of black rubber like original. (except 1953-54) For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars

This is a black molded rubber pedal pad for cars with power brakes. For 1953 1954 1955 1956 1957 Chevrolet Cars

These are molded rubber brake and clutch pedal pads that have the Chevy bowtie on them. For 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars

These are brake and clutch pedal pads made of black rubber like original. For 1937 1938 1939 1940 Chevrolet Cars

These are the rubber bumpers for between the brake and clutch arms and the floor. They prevent the pedasl from banging on the floor after being released. (2 pieces) For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are the little rubber bumpers for the brake and clutch pedals to cushion them from the floor. They keep the pedal from banging on the floor when they return after being ... For 1937 1938 Chevrolet Cars

This bushing is for the clutch and brake pedal shaft. The measurements are 13/16 inch outside diameter x 3/4 inch inside diameter x 1-25/64 inches long. *NOTE* Trim to length ... For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are the felt seals for the brake and clutch pedals at the floor. (2 pieces) For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Brake pedal return spring. Has an overall length of 5-3/4 inches. Chevrolet 1940-1954 car. Check your return spring and if it is rusty or you have play in the pedal you should... For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is the master cylinder inspection plug in the floor of the interior of the car. 3-3/8 inch diameter for the 3 inch hole. For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

This reproduction gas pedal with a metal hinge is a superior quality reproduction. It measures. 8-15/16 inches tall. For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is a nice reproduction of a gas pedal with a metal hinge. It measures 9 inches x 1-3/4 inches. (fits some 1940 cars). For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is a nice reproduction of a gas pedal with a metal hinge. It measures 9 inches x 1-3/4 inches. (fits some 1940 cars). Hinge has two bolt holes instead of one like origina... For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is a cool gas pedal accessory cover that has a heel pad with a Chevy bowtie. Pedal width is 1-3/4 inches. This will save your carpet from having a hole worn in it from yo... For All Chevrolet Cars

Gas Pedal 9in. x 2-1/4in. For 1935 1936 1937 1938 1939 1940 Chevrolet Cars

This is a 1940-48 gas pedal. It has no metal backing, just the rubber cover (Re-use your old metal backing and hinge) For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is a metal, chrome and painted gas pedal cover that has straps across the back to fasten it to your pedal. We also have the matching barefoot dimmer switch pedal as our p... For All Cars and Trucks

This is a chrome firewall mounted gas pedal. For All Cars and Trucks

This is a polished aluminum firewall mounted gas pedal. For All Cars and Trucks

This gas pedal is a chromed steel arm and a polished aluminum pad with 2 rubber inserts. For All Cars and Trucks

This is a floor mounted chromed aluminum gas pedal with 2 rubber inserts. For All Cars and Trucks

This gas pedal is a chromed steel arm and a polished aluminum pad with six rubber inserts. For All Cars and Trucks

This gas pedal is a chromed steel pad with 2 rubber inserts. For All Cars and Trucks

This is a floor mounted polished aluminum gas pedal with 2 rubber inserts. For All Cars and Trucks

This is the felt seal that goes on the gas pedal rod in the floor. (3 piece set) For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This seal is for the gas pedal rod in floor. There's a 7/16 inch inside diameter hole for rod. The outside diameter of the seal is 2 inches. For 1935 1936 1937 1938 1939 1940 Chevrolet Cars

These are the grommets to use where the gas pedal connection and the headlight dimmer switch protrude through the carpet. They give the carpet a nice finished look. For 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars

This rubber cap snaps over metal starter button. Made of black rubber and measures 1/2 inch in height and 2-1/16 inches in diameter. For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars

This is the rubber pad on the starter pedal on the floor. It has a 2 inch diameter and a 1-1/4 inch total height. For 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is a rubber starter bellows for 1938-48. For 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is a rubber starter bellows. Fits 1936 Standard and 1937 Master models. For 1936 1937 Chevrolet Cars

This is the starter pedal return spring. If your pedal is loose, limp or rattling you probably need a new return spring. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is a foam rubber seal for the floor shifter from the transmission lever to the floor. For 1937 1938 Chevrolet Cars

This is the rubber cap on the floor shift tower. For 1937 1938 Chevrolet Cars

This is a floor shifter boot replacement for 3 speed transmission (uses #3654365T trim ring). For All Chevrolet Cars and Trucks

This is the trim ring around the shifter boot on the floor. Made of stainless steel. Use this to retain the boot # 3651348A. For All Chevrolet Cars and Trucks

This is the seal for the transmission mounted E-brake where it protrudes through the floor. Brake Seal. Made out of foam rubber. For 1937 1938 Chevrolet Cars

This is an emergency brake pedal boot. Floor hand brake (not original) uses trim plate #595026 For All Chevrolet Cars and Trucks

This is a stainless steel trim plate that retains the emergency brake boot #594988A. For All Chevrolet Cars and Trucks

These are the screws for the floorboard transmission cover. For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is the metal battery inspection cover plate located in the floor. For 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars

This is the seal for the battery inspection cover plate in the floor. For 1937 1938 1939 Chevrolet Cars

This is a metal plug that fits the holes in floor. They are 3/4 inch in diameter. Includes 2 pieces For All Chevrolet Cars and Trucks

This is a metal plug that fits the holes in floor. They are 1/2 inch in diameter. Includes 2 pieces For All Chevrolet Cars and Trucks

This is a metal plug. They are 1'' inch hole size with 1-1/8'' head Includes 2 pieces For All Chevrolet Cars and Trucks

This is a metal plug. They are 1-1/4 inches in diameter. Includes 2 pieces For All Chevrolet Cars and Trucks

This is a metal plug that fits the hole in floor over body mount bolts. They are 1-1/2 inches in diameter. Includes 2 pieces For All Chevrolet Cars and Trucks

This is a dimmer switch cover. We also have the matching barefoot gas pedal as our part # R8520. These have been around since the 1960's. For All Cars and Trucks

This a polished aluminum and very easy to install dimmer pad with two rubber inserts. For All Cars and Trucks