This is a die stamped spare tire well original fit 49-54, modify for 41-48 Made in the USA Outside flange length: 29-3/4 inches, inside 28-1/8 inches (floor opening) Outside f... For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is a floorboard from the front to the rear seat riser. For 1949 1950 1951 1952 Chevrolet Cars

This is a left rear floorboard repair panel. For 1949 1950 1951 1952 Chevrolet Cars

This is a right rear floorboard repair panel. For 1949 1950 1951 1952 Chevrolet Cars

This is a cargo floorboard area for a Sedan Delivery only. Made in the USA This item is oversized, extra shipping charges will apply. For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is a 2 piece set of trunk floor repair panels. (does not fit station wagon or sedan delivery) For 1949 1950 1951 1952 Chevrolet Cars

These floor support brackets are for the Sedan Delivery. The brackets replace the floor supports that hold up the wooden panels behind the seat. 18 Gage steel. Made in the USA... For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is a complete floor pan. Exquisite detail went into this full floor. The braces are already attached. One piece from toe board back to trunk floor. *NOTE* *Does not inclu... For 1949 1950 1951 1952 Chevrolet Cars

This is a complete trunk floor pan. Exquisite detail went into this piece. The braces are already attached. For 1949 1950 1951 1952 Chevrolet Cars

This is a replacement transmission tunnel section made from heavy 18 gage steel. It has the OEM style shapes and curves to correctly fit with adjacent floor pans and the OEM f... For 1949 1950 1951 1952 Chevrolet Cars

This is the left front toe board repair panel. It's superior quality die stamped steel. Made in the USA For 1949 1950 1951 1952 Chevrolet Cars

This is the right front toe board repair panel. It's superior quality die stamped steel. Made in the USA For 1949 1950 1951 1952 Chevrolet Cars

This is a right front floorboard repair panel. For 1949 1950 1951 1952 Chevrolet Cars

This is a die stamped floorboard repair panel for the front left. Replaces from the bottom of the toe board rearward to about the back of the front seat. Made in the USA For 1949 1950 1951 1952 Chevrolet Cars

This is a die stamped floorboard repair panel for the front right. Replaces from the bottom of the toe board rearward to about the back of the front seat. Made in the USA For 1949 1950 1951 1952 Chevrolet Cars

This is a superior quality die stamped floorboard repair panel for the rear left. (rocker to the center of the drive line hump) Replaces from a few inches under the front seat... For 1949 1950 1951 1952 Chevrolet Cars

This is a superior quality die stamped floorboard repair panel for the rear right. (rocker to the center of the drive line hump) Replaces from a few inches under the front sea... For 1949 1950 1951 1952 Chevrolet Cars

This is a one piece center floor brace that attaches the floor to the left and right rocker panels. This item is oversized, extra shipping charges will apply. For 1949 1950 1951 1952 Chevrolet Cars

This is a one piece front floor brace that attaches the floor to the left and right rocker panels. This item is oversized, extra shipping charges will apply. For 1949 1950 1951 1952 Chevrolet Cars

This is a one piece rear floor brace that attaches the floor to the left and right rocker panels. This item is oversized, extra shipping charges will apply. For 1949 1950 1951 1952 Chevrolet Cars

This is a die stamped center floor brace that fits the right side. Made in the USA For 1949 1950 1951 1952 Chevrolet Cars

This is a front floor brace that fits the left or right side. Made in the USA For 1949 1950 1951 1952 Chevrolet Cars

This is a center floor brace that fits the left side. Made in the USA For 1949 1950 1951 1952 Chevrolet Cars

This is a center floor brace that fits the right side. Made in the USA For 1949 1950 1951 1952 Chevrolet Cars

This is a die stamped floor brace for the left side. Made in the USA For 1949 1950 1951 1952 Chevrolet Cars

This is the front floor brace for the left side that attaches to the cowl. For 1949 1950 1951 1952 Chevrolet Cars

This is the front floor brace for the right side that attaches to the cowl. For 1949 1950 1951 1952 Chevrolet Cars

This is a die stamped inner left rear wheel house for 2 doors. These are always rusted out so instead of piecing some sheet metal together, replace the unit with the proper pi... For 1949 1950 Chevrolet Cars

This is a die stamped inner right rear wheel house for 2 doors. These are always rusted out so instead of piecing some sheet metal together, replace the unit with the proper p... For 1949 1950 Chevrolet Cars

This is the outer left side floor section for the trunk. It has the hole for the gas filler neck. For 1949 1950 Chevrolet Cars

This is a much needed part when repairing the tail pan and trunk floor extension area at the rear of the 1949-52 Chevrolet. This brace is located at the rear of the trunk floo... For 1949 1950 1951 1952 Chevrolet Cars

This is a trunk floor extension panel. (will not fit station wagon or sedan delivery) Made in the USA This item is oversized, extra shipping charges will apply. For 1949 1950 1951 1952 Chevrolet Cars

The hardtop and convertible cars have a special 4th row floor brace near the rear door post consisting of a series of braces and reinforcement brackets and connector plates th... For 1949 1950 1951 1952 1953 1954 Cars