Chevs of the 40s Facebook PageChevs of the 40s Twitter Account

custom cover
See Us On Trucks

Top News

Customer Raves

Seal Guarantee
Filtered By:
View as:

65 Items Found
Now Showing 1 thru 65
First PagePrevious Page 1 Next PageLast Page

1953 Flame Thrower Kit - Street Rod
1953 CHEVROLET Flame Thrower Kit - Single Exhaust
Flame Thrower Kit Single exhaust kit. Shoots flames up to 20ft (For recreational use only. Not for street use). The kit's main control box will control 2 spark plug for optima...
For All Chevrolet Cars and Trucks


$100.00 Each
1953 CHEVROLET Flame Thrower Kit - Dual Exhaust
Flame Thrower Kit Dual exhaust kit. Shoots flames up to 20ft (For recreational use only. Not for street use). The kit's main control box will control 2 spark plug for optimal ...
For All Chevrolet Cars and Trucks


$199.00 Each
1953 Sanderson Headers - Street Rod
1953 CHEVROLET Headers, Sanderson -Rear Dump For Camaro Suspension. Black Painted
These are Sanderson tube headers for a 1970-92 Camaro front clip with straight or angle spark plugs. The left side (driver) angles back 15 degrees and the right side (passenge...
For All Chevrolet Cars and Trucks


$255.00 Set
1953 CHEVROLET Headers, Sanderson -For Stock Steering. Ceramic Coated
These sanderson tube headers are for stock steering, Ceramic coated. Fits '49-'54 Chevrolet passenger cars with Small Block Chevy engines. It works with front or side mounts a...
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

365798C50J 49-54
Click for more details

$425.00 Set
Click for more details
1953 CHEVROLET Headers, Sanderson -For Stock Steering
These sanderson tube headers are for stock steering Fits '49-'54 Chevrolet passenger cars with Small Block Chevy engines. It works with front or side mounts and stock chassis ...
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

365798CC50 49-54
Click for more details

$255.00 Set
1953 CHEVROLET Headers, Sanderson -1967-69 Camaro Clip. Angled Plugs
These are Sanderson tube headers that fit a 1967-79 Camaro suspension clip with angled plug heads. Designed for use with angle plug heads. It is a very tight fitting header us...
For All Chevrolet Cars and Trucks


$255.00 Set
1953 CHEVROLET Headers, Sanderson -1967-69 Camaro Clip. HO Heads W/ Angled Plugs
These are Sanderson tube headers that fit a 1967-79 Camaro suspension clip. This header was designed for the new General Motors high output engine with angle plugs and D-Port ...
For All Chevrolet Cars and Trucks


$255.00 Set
1953 CHEVROLET Headers, Sanderson -For Angle Plug Heads. Ceramic Coated
These are ceramic coated Sanderson tube headers that fit early street rod applications. This header is designed to fit 1927 and up automobiles with small block Chevrolet engin...
For All Chevrolet Cars and Trucks


$375.00 Set
Click for more details
1953 CHEVROLET Headers, Sanderson -Tube For Rack & Pinion Or Cross Steer, Ceramic Coated For Chevy Big Block
These are ceramic coated Sanderson tube headers made for rack & pinion or cross steer vehicles including 1932-'48 cars and trucks; 1955-'63 Chevy cars; 1949-'54 Chevy and 1948...
For All Chevrolet Cars and Trucks

365783BB1JET
Click for more details

$475.00 Set
Click for more details
1953 CHEVROLET Headers, Sanderson -Tube 1967-92 Camaro Clip W/ Big Block Chevy
These are Sanderson tube headers made for 1967-92 Camaro suspension clip with a big block Chevy engine.
For All Chevrolet Cars and Trucks


$345.00 Set
1953 CHEVROLET Headers, Sanderson -Cast Iron For Big Block Chevy - Ceramic Coated
These are ceramic coated, cast iron big block Chevy headers for use with D-port and anti-reversion technologies. Fits Model A's thru 1963 Chevrolet passenger cars. Comes with ...
For All Chevrolet Cars and Trucks


$700.00 Set
Click for more details
1953 CHEVROLET Headers, Sanderson -For Stock, Rack & Pinion Or Cross Steer. Straight Or Angled Plug
Sanderson Headers for small block Chevy with stock, rack and pinion or cross steer vehicles. Use with straight or angled plug heads. This 4 inch tall header speaks for itself....
For All Chevrolet Cars and Trucks


$255.00 Set
1953 CHEVROLET Headers, Sanderson -Cast Iron, 70-92 Camaro Suspension
These are cast iron Sanderson headers for 1970-92 Camaro Suspension. Rear exit collector design clears crossmember and steering in 1964 and up Chevelle, El Camino, and full si...
For All Chevrolet Cars and Trucks


$420.00 Set
1953 CHEVROLET Headers, Sanderson -Cast Iron, Ceramic Coated -1970-92 Camaro Suspension
These are ceramic coated cast iron Sanderson headers for 1970-92 Camaro Suspension. The rear exit collector design clears crossmembers and steering in 1964 and up Chevelle, El...
For All Chevrolet Cars and Trucks


$600.00 Set
Click for more details
1953 Headers, Sanderson -Custom Tube Or Cast Headers For Various Makes/ Models
Don't see headers available for your vehicle on our site? Please call or email us for additional or custom application headers. Many direct fit headers are available.
For All Cars and Trucks



Click for more details
1953 Fenton Headers
1953 CHEVROLET Headers, Fenton For 1937-62 216ci, 235ci & 261ci Engines. Reproduced Under License
These are cast iron Fenton Headers being reproduced under license from Fenton for all 1937-62 216ci, 235ci & 261ci engines. Wow! Comes with header flange and gaskets. **Some m...
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks

3657963A 37^62
Click for more details

$200.00 Pair
1953 Flange Plate - Street Rod
1953 CHEVROLET Exhaust Flange Plate, For Fenton Headers
This is a flange plate that holds the header pipe to the header for a 235 engine. For Fenton headers our part #3657963.
For 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars and Trucks

3696988F 51-57
Click for more details

$3.50 Each
1953 Sanderson Headers - Street Rod
1953 CHEVROLET Headers, Sanderson -For Stock, Rack & Pinion Or Cross Steer. Straight Or Angled Plug. Ceramic Coated
These ceramic coated Sanderson headers for a small block Chevy GM with stock, rack and pinion or cross steer vehicles. Use with straight or angled plug heads. This 4" tal...
For All Chevrolet Cars and Trucks

365790CC2JET
Click for more details

$425.00 Set
Click for more details
1953 Fenton Headers
1953 GMC Headers, Fenton For GMC 228ci, 247ci & 270ci Engines. Reproduced Under License
These are cast iron Fenton Headers being reproduced under license from Fenton for all GMC 228ci, 247ci, 270ci & 302ci engines. Wow! Comes with header flange (stamped GMC) and ...
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 GMC Cars and Trucks

3657963G 37-62
Click for more details

$260.00 Pair
1953 Fenton Header Parts
1953 CHEVROLET Exhaust Header Bolt Set For Fenton Headers
This is a bolt kit for Fenton Headers that includes the bolts and washers.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks

3657963S 37^62
Click for more details

$5.00 Set
1953 Fenton Heat Kit
1953 CHEVROLET Header Heat Kit. Fenton Headers To Fenton Intake (235ci Only)
This is a heat kit. header to fenton intake, will also fit offenhauser intake. 235 cubic inch only.
For 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks


$40.00 Each
1953 Tube Headers
1953 CHEVROLET Headers, Tube -Fits 216ci, 235ci & 261ci Chevy 6 Cylinder. Black Painted Finish With Flanges
These are the best Chevy 6-cylinder headers on the market. Made of black painted steel. They fit 1937-62 216ci, 235ci & 261ci engines. The tubing is mandrel bent to provide th...
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks

3657963T 37-62
Click for more details

$150.00 Set
1953 CHEVROLET Headers. Tube -Fits 216ci, 235ci & 261ci Chevy 6 Cylinder. Polished Stainless With Flanges
These are the best Chevy 6-cylinder headers on the market. Made of polished 304 stainless steel. They fit 1937-62 216ci, 235ci & 261ci engines. The tubing is mandrel bent to p...
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks

3657963SS 37-62
Click for more details

$200.00 Set
1953 Exhaust System
1953 CHEVROLET Exhaust System (Except Convertible, Wagon, Sedan Delivery)
This is a exhaust system for (except convertible) that includes header pipe-(except convertible,53 sedan delivery) muffler tailpipe-(except convertible,53 sedan delivery) 2 mu...
For 1953 Chevrolet Cars

3697963B 53^
Click for more details

$275.00 Each
1953 CHEVROLET Exhaust System -Wagon
This is a exhaust system for the Wagon that includes header pipe-(except convertible,53 sedan delivery) muffler tailpipe-wagon ($28 shipping CA) 2 muffler clamps manifold stud...
For 1953 Chevrolet Cars

3701620B 53^
Click for more details

$275.00 Each
1953 CHEVROLET Exhaust System -Sedan Delivery
This is a exhaust system Sedan Delivery that includes header pipe -Sedan Delivery tailpipe (except convertible and Wagon) muffler 2 muffler clamps manifold studs brass nuts ga...
For 1953 Chevrolet Cars

3704564B 53^
Click for more details

$275.00 Each
1953 CHEVROLET Exhaust System -Convertible
This is a exhaust system for a convertible that include header pipe-convertible (except 51-52 convertible with manual trans muffler tailpipe-convertible 2 muffler clamps manif...
For 1953 1954 Chevrolet Cars

3697976B 53^54
Click for more details

$275.00 Each
1953 Header Pipe
1953 CHEVROLET Exhaust Header Pipe (Except Convertible, 53 Sedan Delivery & 51-52 Manual Transmission)
This is a header pipe (except Convertible, 53 Sedan Delivery & 51-52 stick).
For 1951 1952 1953 1954 Chevrolet Cars

3701055 51+54
Click for more details

$90.00 Each
1953 CHEVROLET Exhaust Header Pipe -Convertible (Except 51-52 Convertible With Manual Transmission)
This is a header pipe for the Convertible (except 51-52 Convertible stick Flange not included. Part # 593607 is for the flange) It is aluminized at no extra charge.
For 1951 1952 1953 1954 Chevrolet Cars

3697058 51+54
Click for more details

$90.00 Each
1953 CHEVROLET Exhaust Header Pipe -Sedan Delivery
This is a header pipe for the Sedan Delivery it does not included flange. Part # 593607 for the flange with a 216 engine or 3696988 with a 235 engine. It is aluminized at no e...
For 1953 Chevrolet Cars


$90.00 Each
1953 Muffler
1953 CHEVROLET Exhaust Muffler -All Cars (Except Manual Transmission & 50-52 Convertible)
This is a muffler for all cars (Except stick & 50-52 Convertible) 16 inch length, 9 inches diameter.
For 1950 1951 1952 1953 Chevrolet Cars

3697813 50^53
Click for more details

$97.00 Each
1953 CHEVROLET Exhaust Muffler -Convertible
This is a exhaust muffler that fits convertible.
For 1953 1954 Chevrolet Cars

3698714 53^54
Click for more details

$85.75 Each
1953 Tailpipe
1953 CHEVROLET Exhaust Tailpipe (Except Convertible & Wagon)
This is a tailpipe that is aluminized at no extra charge. (except Convertible and 52 Wagon)
For 1953 Chevrolet Cars


$90.00 Each
1953 CHEVROLET Exhaust Tailpipe -Convertible
This is a tailpipe for the Convertible that is aluminized at no extra charge .
For 1953 1954 Chevrolet Cars

3697976 53+54
Click for more details

$90.00 Each
1953 Gasket-Manifold
1953 CHEVROLET Intake & Exhaust Manifold Gaskets - 216 Engine
This is the intake & exhaust manifold gaskets for 216 engines (3 pieces).
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks

602483A 37/53
Click for more details

$15.75 Set
1953 CHEVROLET Intake/ Exhaust Manifold Gaskets 235ci & 261ci Engines
This is the intake & exhaust manifold gaskets for 235 inch & 261 inch engines. (3 pieces).
For 1950 1951 1952 1953 1954 1955 1956 1957 1958 Chevrolet Cars and Trucks

3707045 50/58
Click for more details

$16.50 Set
1953 CHEVROLET Intake / Exhaust Manifold Gasket - (Rectangle) Fits Between Intake and Exhaust, 216ci
This is the rectangle gasket that goes between the intake and exhaust manifolds. Fits 216ci engines.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks

838290 37/53
Click for more details

$6.00 Each
1953 CHEVROLET Intake / Exhaust Manifold Gasket - (Rectangle) Fits Between Intake and Exhaust
This is the rectangle gasket that goes between the intake and exhaust manifolds. Fits 235 inch & 261 inch engines.
For 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks

3835572 50-62
Click for more details

$6.00 Each
1953 Heat Riser Spring
1953 CHEVROLET Exhaust Manifold Heat Riser Spring (Thermostat)
This is the heat riser spring for the exhaust manifold.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

838573 37+54
Click for more details

$17.25 Each
1953 CHEVROLET Heat Riser Spring (Anti-Rattle)
This is the anti-rattle heat riser spring for the exhaust manifold.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

602799 37+54
Click for more details

$7.00 Each
1953 Heat Riser Shaft
1953 CHEVROLET Exhaust Manifold Heat Riser Shaft -Oversize, Requires Reaming Of Manifold Holes
This is an oversize heat riser shaft for the exhaust manifold. This is oversize and requires reaming of the worn manifold holes to install. Using this part installed properly ...
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

596264A 37+54
Click for more details

$23.00 Each
1953 Studs In Manifold
1953 CHEVROLET Header Pipe Studs In Manifold
These are the studs in the manifold for the header pipe. They measure 3/8 inch x 2 inch w/ 5/16 inch long brass hex nuts.
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

837552B 29^54
Click for more details

$4.75 Set
1953 Flange Plate
1953 CHEVROLET Exhaust Flange Plate -Holds Header Pipe To Manifold, 216ci
This is a flange plate that holds the header pipe to the exhaust manifold for a 216 engine.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks

593607 37+53
Click for more details

$7.50 Each
1953 CHEVROLET Exhaust Flange Plate, 235ci
This is a flange plate that holds the header pipe to the exhaust manifold for a 235 engine.
For 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars and Trucks

3696988 51+57
Click for more details

$9.75 Each
1953 Gasket
1953 CHEVROLET Exhaust Gasket -Header Pipe To Manifold. 34-36 All, 51-52 With Powerglide & 53-54 (Except 53 Sedan Delivery)
This is a gasket for the header pipe to manifold, 34-36 all, 51-52 with Powerglide, 53-54 except 53 Sedan Delivery.
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

3696990 34+54
Click for more details

$3.00 Each
1953 CHEVROLET Exhaust Gasket. Header Pipe To Manifold, 3"
This is a exhaust 3 inch gasket for the header pipe to manifold it fits 37-48, 51-52 and 53 sedan delivery.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars

593606 37^53
Click for more details

$3.50 Each
1953 Muffler Clamp
1953 CHEVROLET Muffler Clamp -Front 2"
This is a 1950-54 front muffler clamp that is a 2 inch size.
For 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

3694837 50+54
Click for more details

$4.50 Each
1953 CHEVROLET Exhaust Muffler Clamp -Rear. 1-3/4"
This is a exhaust muffler clamp rear 1-3/4 inch.
For 1953 1954 Chevrolet Cars

3718800 53^54
Click for more details

$2.00 Each
1953 Tailpipe Hanger
1953 CHEVROLET Exhaust Tailpipe Hanger & Clamp (Not Original)
This is a tailpipe hanger with clamp replacement (2 pieces).
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

3696881A 37^54
Click for more details

$11.00 Each
1953 CHEVROLET Exhaust Tailpipe Hanger -Rubber Only
This is a tailpipe hanger rubber only.
For 1951 1952 1953 1954 Chevrolet Cars

3696885A 51-54
Click for more details

$39.25 Each
1953 CHEVROLET Exhaust Tailpipe Hanger Insulator (Intermediate)
This is a tailpipe hanger insulator intermediate
For 1951 1952 1953 1954 Chevrolet Cars

3697060 51-54
Click for more details

$19.75 Each
1953 CHEVROLET Exhaust Tailpipe Hanger Clamp -Intermediate
This is a tailpipe hanger clamp intermediate except 51-52 stick and all convert 1-3/4 inch (use with insulator #3697060).
For 1951 1952 1953 1954 Chevrolet Cars

3710288 51-54
Click for more details

$12.00 Each
1953 Exhaust Extension
1953 CHEVROLET Exhaust Extension Deflector - Accy. Stainless With Bowtie
This is a stainless steel reproduction of an accessory exhaust extension with a stamped bowtie.
For All Chevrolet Cars and Trucks


$23.25 Each
1953 Exhaust Extension Deflector - Plain, Stainless Steel
This is a polished stainless steel reproduction of an exhaust extension.
For All Cars and Trucks


$15.00 Each
1953 CHEVROLET Exhaust Extension. Bowtie Shape, Chrome
This is a chromed steel exhaust extension with a bowtie shaped outlet. It measures 2-1/4 inches inside diameter.
For All Chevrolet Cars and Trucks


$33.25 Each
1953 CHEVROLET Exhaust Extension. Bowtie Shape, Stainless Steel
This is a stainless steel exhaust extension with a bowtie shaped outlet. It measures 2-1/4 inches inside diameter.
For All Chevrolet Cars and Trucks


$52.00 Each
1953 CHEVROLET Tailpipe Extension Clamp (Original)
This clamp is original for the tailpipe extension and comes with a nut & bolt.
For All Chevrolet Cars and Trucks


$5.50 Each
1953 Paint-Exhaust
1953 Paint -Very High Temperature, Flat Aluminum
This is paint is made for very high temperatures. It's a natural looking flat aluminum color. Made for exhaust manifolds and pipes in a 12 oz spray can.
For All Cars and Trucks

3657963FA ALL
Click for more details

$12.50 Each
1953 Paint -Very High Temperature, Clear
This is clear paint made for very high temperatures. (1200 degree) Made for exhaust manifolds and pipes in a 12 oz spray can.
For All Cars and Trucks

3657963E ALL
Click for more details

$14.00 Each
1953 Paint -Very High Temperature, -Cast Blast Grey For Exhaust & Other Parts
Paint-Cast Blast. Cast blast high temp 1200 degree. etc. 12 oz spray can. This is called 'Cast Blast'. It's grey in color and gives a fresh cast look for exhaust manifolds. Th...
For All Cars and Trucks

3657963D ALL
Click for more details

$11.50 Each
1953 Paint -Exhaust. Stainless Steel Pigments, Pint
This paint is very high temperature with stainless steel pigments. Made for exhaust manifolds & pipes and gives a soft grey, metallic finish.
For All Cars and Trucks

3657963C ALL
Click for more details

$35.00 Pint
1953 Exhaust Header Bracket - Street Rod
1953 CHEVROLET Alternator Bracket, Chrome Pre-69 SB Chevy 283-350 Header Bracket -Driver's Side
This is a driver's side chromed steel alternator bracket for a pre-1969 Chevy small block. Bolst onto the exhaust manifold / header bolts on the head.
For All Chevrolet Cars and Trucks


$7.50 Each
1953 CHEVROLET Alternator Bracket, Chrome Pre-69 SB Chevy 283-350 (Short Water Pump), Header Bracket
This is a chromed steel alternator bracket for a pre-1969 Chevy small block with a short water pump.
For All Chevrolet Cars and Trucks


$7.25 Each
1953 Tube Headers - Street Rod
1953 CHEVROLET Headers, Tube, "Heavy Duty" Street -1942-Up Small Block Chevy (Includes Gaskets & Hardware)
These "Heavy Duty" black painted steel tube headers fit 1942-up small block Chevy. Included is the gaskets and hardware.
For All Chevrolet Cars and Trucks


$138.00 Set
1953 Exhaust Manifold Cover - Street Rod
1953 CHEVROLET Exhaust Manifold Cover -Chrome Small Block Chevy
This is a pair of chromed steel exhaust manifold covers that will really dress up your engine compartment.
For All Chevrolet Cars and Trucks


$65.00 Pair
65 Items Found
Now Showing 1 thru 65
First PagePrevious Page 1 Next PageLast Page