Chevs of the 40s Community Forum

Cooling help

This topic contains 1 reply, has 2 voices, and was last updated by  Dale At Chevs 3 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #707

    Dale At Chevs

    Hi, I will try my best to help you out. First do you have a fan shroud? If not that my help your situation. If that dont help I would recommend an electric fan. You would have to check clearances in order to know if you want to go with a pusher or puller fan. If you would like to discuss this with me in person please call me directly at 800-999-2438 Ext 102. Thanks



    I have installed a Walker radiator in my 39 Chevy sedan. I have still have the engine mounted fan on a 2004-350 HO crate engine with at 180 thermostat. The temp still climbs too high when in stop & go traffic, and will drop once I get up to speed. I am thinking about using an electric fan and not sure where to start.
    Do I use a push or pull fan and what CFM, then which Fan, wiring and relay system’s would you recommend?

    Thank you Tom

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.