|
Front Suspension Components, Shocks, King Pins, Rebuild Kits & Shackles
|
|
Airbags - Street Rod
|
 |
2600LB AIRBAG, 3/8" PORTS. 2 TOP HOLES, ONE BOTTOM HOLE
2600lb airbag. 3/8" ports, 2 top holes (2-3/4" center-to-center) & 1 bottom hole.
Built specifically for automotive suspensions rather than machine or industrial ap...
For All Cars and Trucks
|
$59.00 EA
|
 |
2500LB AIRBAG, 3/8" PORTS. 2 TOP HOLES, ONE BOTTOM HOLE
2500lb airbag. 3/8" ports, 2 top holes (1-3/4" center-to-center) & 1 bottom hole.
Always use the largest diameter bag possible, even if you have to trim to fit. Lar...
For All Cars and Trucks
|
$59.00 EA
|
|
Suspension Upgrade - Street Rod
|
 |
A-ARMS, TUBULAR FULL WIDTH LOWER -POLISHED STAINLESS
Full a-arm lower control arm uses no strut rod! triangulated a-arm design, similar to factory g.m. control arms, provides stability and strength within the arm itself. all wel...
For All Cars and Trucks
|
$899.00 Pair
|
|
AirWave Shocks - Street Rod
|
 |
AIRWAVE 2500LB NON ADJUSTABLE, BUILT IN SHOCK
2500lb. non-adjustable, built-in shock and bag.
6-1/4" dia.
Built to your specifications.
Just provide us with the following information:
·Air shock length, open/ lift...
For All Cars and Trucks
|
$499.00 PR
|
 |
AIRWAVE 2500LB 10 POSITION ADJUSTABLE, BUILT IN SHOCK
2500lb., 10 position adjustable, built-in shock and bag.
6-1/4" dia.
Built to your specifications.
Just give us the following information:
Air shock length, open:
Air ...
For All Cars and Trucks
|
$599.00 PR
|
|
C5 Corvette Suspension Conversion - Street Rod
|
 |
CHEVROLET 1939-48 CHEVY CAR -CORVETTE C5 (97-04) SUSPENSION CONVERSION CROSSMEMBER
C5 Corvette Suspension Conversion. Bolt on front crossmember. Fits 1939-48 Chevy car & sedan delivery (exc. straight axle) using your C5 suspension components.
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$895.00 Each
|
|
Airbags - Street Rod
|
 |
2500LB AIRBAG, 3/8" PORTS. 2 TOP HOLES, ONE BOTTOM HOLE - DENOMINATOR-II
DeNominator II 2500lb airbag, 600psi. 3/8" ports, 2 top holes (1-3/4" center-to-center) & 1 bottom hole.
Built specifically for automotive suspensions rather than m...
For All Cars and Trucks
|
$79.00 EA
|
 |
2600LB AIRBAG, 3/8" PORTS. 2 TOP HOLES, ONE BOTTOM HOLE - DENOMINATOR II
DeNominator II 2600lb airbag, 500psi. 3/8" ports, 2 top holes (2-3/4" center-to-center) & 1 bottom hole.
Always use the largest diameter bag possible, even if you h...
For All Cars and Trucks
|
$79.00 EA
|
|
Steering Rack -Manual - Street Rod
|
 |
MANUAL STEERING RACK -CHROME, 1974-78 FORD MUSTANG II
CHROME 1974-1978 Ford Mustang II Manual Steering Rack.
For All Cars and Trucks
|
$170.00 EA
|
 |
MANUAL STEERING RACK -PLAIN, 1974-78 FORD MUSTANG II
1974-1978 Ford Mustang II Manual Steering Rack.
For All Cars and Trucks
|
$130.00 EA
|
|
Front End Rebuild Kit
|
|
CHEVROLET DELUXE FRONT END REBUILD KIT, 39-48 CHEVY CAR
Front End Rebuild Kit. Rebuild your steering and suspension system and put new car handling back in your car.
· 4 Outer Pin Kits
· 2 Outer Tie Rod Ends
· 2 Stabilizer Link Ki...
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$400.00 Kit
|
 |
CHEVROLET DELUXE FRONT END REBUILD KIT, 49-54 CHEVY CAR
Front End Rebuild Kit. Rebuild your steering and suspension system and put new car handling back in your car.
· 4 Outer Pin Kits
· 2 Outer Tie Rod Ends
· 2 Stabilizer Link Ki...
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$400.00 Kit
|
|
IFS Superide II Kit - Street Rod
|
 |
CHEVROLET SUSPENSION KIT. HEIDTs WELD IN, SUPERIDE II, 37-39 CHEV CAR
FRONT IFS KIT. HEIDT'S WELD-IN SUPERIDE II, 37-39 CHEV CAR
Contents of kits:
Exclusive one piece dropped mustang II spindles.
11" disc brake vented rotors (choose either...
For 1937 1938 1939 Chevrolet Cars
|
$2899.00 KIT
|
 |
CHEVROLET SUSPENSION KIT. HEIDTs WELD IN, SUPERIDE II, 40-48 CHEV CAR
FRONT IFS KIT. HEIDT'S WELD-IN SUPERIDE II, 40-48 CHEV CAR
Contents of kits:
Exclusive one piece dropped mustang II spindles.
11" disc brake vented rotors (choose either...
For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$2899.00 KIT
|
|
IFS Mustang II Kit - Weld In - Street Rod
|
|
|
SUSPENSION KIT. HEIDTs WELD IN, FABRICATED A-ARMS WITHOUT CROSSMEMBER
SUSPENSION KIT. HEIDT'S WELD IN, FABRICATED A-ARMS WITHOUT CROSSMEMBER.
Includes new formed steel economy upper and lower full width A-arms. All packages include:
11" f...
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars and Trucks
|
$1475.00 EA
|
|
|
SUSPENSION KIT. HEIDTs WELD IN, TUBULAR A-ARMS WITHOUT CROSSMEMBER
SUSPENSION KIT. HEIDT'S WELD IN, TUBULAR A-ARMS WITHOUT CROSSMEMBER.
Includes plain tubular upper and lower, full width A-arms. all packages include: 11" five lug rotors...
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars and Trucks
|
$1485.00 KIT
|
 |
SUSPENSION KIT. HEIDTs WELD IN, TUBULAR A-ARMS WITH CROSSMEMBER
SUSPENSION KIT. HEIDT'S WELD IN, TUBULAR A-ARMS WITH CROSSMEMBER.
Includes plain tubular upper and lower full width A-arms. All packages include: 11" five lug rotors; bea...
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars and Trucks
|
$1899.00 KIT
|
|
IFS Components Package - Street Rod
|
 |
FRONT SUSPENSION COMPONENTS PACKAGE. MUSTANG II/ PINTO W/ TUBULAR STEEL A-ARMS FOR 1937-48 CHEVY CAR
Mustang II/ Pinto front suspension component package for 37-48 Chevy Cars.
tubular upper and lower a-arms, strut rods with bushings, spindles with nuts, Chassis Engineering c...
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars
|
$1427.00 SET
|
 |
FRONT SUSPENSION COMPONENTS PACKAGE. MUSTANG II/ PINTO STAMPED STEEL A-ARMS FOR 1949-54 CHEVY CAR
Mustang II/ Pinto front suspension component package for 49-54 Chevy Cars.
Kit with economy upper & lower A-Arms.
Complete hub-to-hub kit Includes:
Economy upper and full lo...
For 1949 1950 1951 1952 1953 1954 Cars
|
$1427.00 SET
|
 |
FRONT SUSPENSION COMPONENTS PACKAGE. MUSTANG II/ PINTO W/ TUBULAR POLISHED, STAINLESS A-ARMS FOR 1937-48 CHEVY CAR & 37-54 CHEVY TRUCK
Mustang II/ Pinto front suspension component package for 37-48 Chevy Cars & 37-54 Chevy Trucks.
**NOTE: 49-54 Chevy Car is manual rack only!
Complete hub-to-hub kit includes: ...
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars and Trucks
|
$2275.00 SET
|
 |
FRONT SUSPENSION COMPONENTS PACKAGE. MUSTANG II/ PINTO WITH TUBULAR STEEL A-ARMS FOR 1949-54 CHEVY CAR
Mustang II/ Pinto front suspension component package for 49-54 Chevy Cars.
Kit with steel tubular upper A-Arms & full lower A-Arms.
Complete hub-to-hub kit includes:
Tubula...
For 1949 1950 1951 1952 1953 1954 Cars
|
$1427.00 SET
|
|
Crossmember (Heidts Weld In) - Chevy Cars - Street Rod
|
 |
CHEVROLET CROSSMEMBER. MUSTANG II, HEIDTs WELD-IN (STD). 37-39 CHEV CAR
STANDARD. Fits '37-'39 Chevy Cars.
Correct design results in correct camber action
no bumpsteer
For 1937 1938 1939 Chevrolet Cars
|
$399.00 Each
|
 |
CHEVROLET CROSSMEMBER. MUSTANG II, HEIDTs WELD-IN (STD). 40-48 CHEV CAR
STANDARD. Fits '40-'48 Chevy Cars.
Correct design results in correct camber action
no bumpsteer
For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$399.00 Each
|
 |
CHEVROLET CROSSMEMBER. MUSTANG II, HEIDT'S WELD-IN (STD). 49-54 CHEV CAR
STANDARD. Fits '49-'54 Chevy Cars.
Correct design results in correct camber action
no bumpsteer
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$399.00 Each
|
|
Steering Rack -Power - Street Rod
|
 |
POWER STEERING RACK -BLACK MUSTANG II
Tie Rod Ends and Steering Rack Bushings sold separately.
For All
|
$225.00 EA
|
|
Heidts IFS Components - Mustang II Spindle - Street Rod
|
 |
SPINDLES -MUSTANG II, STEEL. 2" DROPPED
Spindle. Mustang II. 2" drop. 1045 heat-treated alloy steel. Uses all stock rotors, bearings, calipers, etc. making it easy to install. Retains stock factory geometry.
Al...
For All Cars and Trucks
|
$190.00 PR
|
|
Sway Bar - Street Rod
|
 |
SWAY BAR BRACKET KIT. FOR TUBULAR FULL LOWER A-ARMS -STAINLESS STEEL
Bracket kit.
for use with heidts tubular full lower a-arms
For All Cars and Trucks
|
$80.00 SET
|
 |
SWAY BAR BRACKET KIT. FOR TUBULAR FULL LOWER A-ARMS -PLAIN STEEL
SWAY BAR BRACKET KIT. FOR HEIDT'S TUBULAR FULL LOWER A-ARMS - PLAIN STEEL
For All Cars and Trucks
|
$25.00 SET
|
|
|
SWAY BAR BRACKET KIT. FOR FABRICATED FULL LOWER A-ARMS -PLAIN STEEL
Bracket kit.
for use with heidts economy full lower a-arms or stock lower control arms.
For All Cars and Trucks
|
$25.00 SET
|
|
|
CHEVROLET SWAY BAR. FRONT -HEIDTS MUSTANG II SUSPENSION KIT -49-54 CHEV CAR
SWAY BAR. FRONT - HEIDTS MUSTANG II SUSPENSION KIT - 49-54 CHEV CAR
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$181.25 EA
|
|
|
CHEVROLET SWAY BAR. FRONT -HEIDTS MUSTANG II SUSPENSION KIT -40-48 CHEV CAR
SWAY BAR. FRONT - HEIDTS MUSTANG II SUSPENSION KIT - 40-48 CHEV CAR
For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$159.00 EA
|
|
|
CHEVROLET SWAY BAR. FRONT -HEIDTS MUSTANG II SUSPENSION KIT -37-39 CHEV CAR
SWAY BAR. FRONT - HEIDTS MUSTANG II SUSPENSION KIT - 37-39 CHEV CAR
For 1937 1938 1939 Chevrolet Cars
|
$159.00 EA
|
|
Heidts IFS Components - Mustang II Spindle - Street Rod
|
 |
SPINDLES -MUSTANG II, STEEL. STOCK HEIGHT
Spindle. Mustang II. Stock height. 1045 heat-treated alloy steel. Uses all stock rotors, bearings, calipers, etc. making it easy to install. Retains stock factory geometry.
Al...
For All Cars and Trucks
|
$190.00 PR
|
|
Crossmember (Bolt In) - Street Rod
|
 |
CHEVROLET CROSSMEMBER KIT (BOLT-ON) FOR MUSTANG II/ PINTO FRONT END. FITS 37-39 CHEVY CAR
Bolt-in crossmember kit provides superior strength and 2-1/2" adjustability for Mustang II/ Pinto front end. Uses stock pinto-mustang II geometry so there is no bump stee...
For 1937 1938 1939 Chevrolet Cars
|
$625.00 Each
|
|
|
CHEVROLET CROSSMEMBER KIT (BOLT-ON) FOR MUSTANG II/ PINTO FRONT END. FITS 40 CHEVY CAR
Bolt-in crossmember kit provides superior strength and 2-1/2" adjustibility for Mustang II/ Pinto front end. Center support rods add strength & durability to lower strut ...
For 1940 Chevrolet Cars
|
$625.00 Each
|
 |
CHEVROLET CROSSMEMBER (BOLT-ON) FOR MUSTANG II/ PINTO FRONT END. FITS 41-48 CHEVY CAR
Bolt-in crossmember kit provides superior strength and 2-1/2" adjustability for Mustang II/ Pinto front end. Uses stock pinto-mustang II geometry so there is no bump stee...
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$625.00 Each
|
 |
CHEVROLET CROSSMEMBER (BOLT-ON) FOR MUSTANG II/ PINTO FRONT END. FITS 49-54 CHEVY CAR
Bolt-in crossmember kit provides superior strength and 2-1/2" adjustibility for Mustang II/ Pinto front end. Uses wide lower A-arm for clearance. Center support rods add ...
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$625.00 Each
|
|
Crossmember - Motor Mounts - Street Rod
|
 |
CHEVROLET MOTOR MOUNTS. WELD-ON OPTION FOR CHEVY SB CROSSMEMBER IF-4954CP
Option to have mounts welded to crossmember IF-4954CP. Comes ready to mount your '58 & up small block (bolt-on mounts available separately also). Add to IF-4954CP price.
Click...
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$86.00 Set
|
|
Sway Bar-Front - Street Rod
|
|
|
CHEVROLET SWAY BAR. FRONT FOR STRAIGHT AXLE, 37-39 CHEVY CAR
Sway Bar. Front. Improve the handling of your top heavy Chevy. For straight axle cars.
For best results use front and rear sway bars together.
Includes all linkage and mountin...
For 1937 1938 1939 Chevrolet Cars
|
$129.50 Each
|
 |
CHEVROLET SWAY BAR. FRONT FOR CHASSIS ENGINEERING, 37-39 CHEVY CAR IFS KIT
Sway Bar. 1940-54 Chevy or GMC 1/2Ton truck. Fits Chassis Engineering & Mustang II/ Pinto IFS kits.
For use with fabricated lower a arms.
For best results use front and rear...
For 1937 1938 1939 Chevrolet Cars
|
$129.50 Each
|
|
- Street Rod
|
 |
BRAKE LINES -BRAIDED STAINLESS STEEL FOR WILWOOD CALIPERS
Braided brake lines for Wilwood calipers
For All Cars and Trucks
|
$75.00 SET
|
|
A-Arm Adjusters - Street Rod
|
 |
CHEVROLET ADJUSTERS -5/8 MULTI ANGLE -POLISHED
A-Arm Adjusters 5/8in. multi angle polished for suspension A-arms
For All Chevrolet Cars and Trucks
|
$71.00 Each
|
 |
CHEVROLET ADJUSTERS -5/8 STRAIGHT -POLISHED
A-Arm Adjusters 5/8in. straight angle polished for suspension A-arms
For All Chevrolet Cars and Trucks
|
$44.00 Each
|
|
Digital Gauges (Dakota Digital) - Street Rod
|
 |
AIR RIDE MONITOR GAUGE, 0-150 PSI W/ 2 SENDERS
Digital Guages (Dakota Digital). Air ride gauge with 2 senders, use for front/ rear applications.
- Night dimming.
Range:
A single sensor will be required for each pressu...
For All Cars and Trucks
|
$270.00 Set
|
|
|
AIR RIDE MONITOR GAUGE, 0-150 PSI W/ 3 SENDERS
Digital Guages (Dakota Digital). Air ride gauge with 3 senders, use for front/ rear plus tank applications.
Choice of either Blue or Teal display. Machined aluminum bezel and ...
For All Cars and Trucks
|
$270.00 Set
|
|
|
AIR RIDE MONITOR GAUGE, 0-150 PSI W/ 4 SENDERS
Digital Guages (Dakota Digital). Air ride gauge with 4 senders, use for all 4 corner applications.
Choice of either Blue or Teal display. Machined aluminum bezel and housing w...
For All Cars and Trucks
|
$270.00 Set
|
|
|
AIR RIDE MONITOR GAUGE, 0-150 PSI W/ 5 SENDERS
Digital Guages (Dakota Digital). Air ride gauge with 5 senders, use for all 4 corner plus tank applications.
Choice of either Blue or Teal display. Machined aluminum bezel and...
For All Cars and Trucks
|
$310.00 Set
|
|
|
AIR RIDE MONITOR GAUGE, 0-400 PSI (HIGH PRESSURE) W/ 2 SENDERS
Digital Guages (Dakota Digital). Air ride gauge with (2) 400 psi senders. Use for front/rear applications.
Choice of either Blue or Teal display. Machined aluminum bezel and ...
For All Cars and Trucks
|
$300.00 Set
|
|
|
AIR RIDE MONITOR GAUGE, 0-400 PSI (HIGH PRESSURE) W/ 3 SENDERS
Digital Guages (Dakota Digital). Air ride gauge with (3) 400 psi senders. Use for front/ rear and tank applications.
Choice of either Blue or Teal display. Machined aluminum ...
For All Cars and Trucks
|
$300.00 Set
|
|
|
AIR RIDE MONITOR GAUGE, 0-400 PSI (HIGH PRESSURE) W/ 4 SENDERS
Digital Guages (Dakota Digital). Air ride gauge with (4) 400 psi senders. Use for 4 corner applications.
Choice of either Blue or Teal display. Machined aluminum bezel and ho...
For All Cars and Trucks
|
$360.00 Set
|
|
|
AIR RIDE MONITOR GAUGE, 0-400 PSI (HIGH PRESSURE) W/ 5 SENDERS
Digital Guages (Dakota Digital). Air ride gauge with (5) 400 psi senders. Use for 4 corner plus tank applications.
Choice of either Blue or Teal display. Machined aluminum be...
For All Cars and Trucks
|
$360.00 Set
|
|
Spindle Nut & Washer - Street Rod
|
 |
SPINDLE DUST COVER, NUT, WASHER & LOCK PIN FOR MUSTANG II
Nut, washer & lock pin. Mustang II/Pinto spindles (does 2).
For All Cars
|
$10.50 SET
|
|
Sway Bar-Front - Street Rod
|
 |
CHEVROLET SWAY BAR. FRONT FOR CHASSIS ENGINEERING, 49-54 CHEVY CAR IFS KIT
Sway Bar. Front. Improve the handling of your top heavy Chevy. Use with Chassis Engineering IFS kit (pt #IF-7480EW). Includes bushings and mounts (for economy A-Arms). If usin...
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$134.75 Each
|
 |
CHEVROLET SWAY BAR -FRONT, 41-48 CHEVY CAR WITH PINTO IFS KIT
Sway Bar. Front. Improve the handling of your top heavy Chevy. Use with Chassis Engineering IFS kit (pt # IF-7480EW). Includes bushings and mounts (for economy A-Arms). If usi...
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$129.50 Each
|
|
|
CHEVROLET SWAY BAR -FRONT, 1940 CHEVY CAR WITH PINTO IFS KIT
Sway Bar. Front. Improve the handling of your top heavy Chevy. Use with Chassis Engineering IFS kit (pt # IF-7480EW). Includes bushings and mounts (for economy A-Arms). If usi...
For 1940 Chevrolet Cars
|
$129.50 Each
|
 |
CHEVROLET SWAY BAR FRONT MOUNTING BRACKETS. CHASSIS ENGINEERING IFS KIT, 49-54 CAR
Sway Bar Mount. Brackets for Chassis Engineering IFS kit.
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$30.00 Set
|
|
Air Ride Compressor System - Street Rod
|
 |
Complete 4 way RidePro e 4 way system
Front Air Suspension Complete 4 way RidePro compressor system with new RidePro controller - includes compressor, 3 gallon tank, 4 way RidePro solenoids, RidePro controller, wi...
For All Cars and Trucks
|
$1495.00 Set
|
|
Grease Fitting
|
 |
CHEVROLET GREASE FITTING -1/8" NATIONAL PIPE, STRAIGHT
Grease Fitting. 1/8 in. national pipe, straight.
For All Chevrolet Cars and Trucks
|
$1.50 Each
|
 |
CHEVROLET GREASE FITTING -1/4" x 28 TAPER THREAD, 90 DEGREE
Grease Fitting. 1/4 in. x 28 taper thread, 90 degree.
For All Chevrolet Cars and Trucks
|
$1.50 Each
|
|
Link Pin -Upper A-Frame
|
 |
CHEVROLET LINK PINS -UPPER, OUTER W/ SEALS
Link Pin. Upper outer w/ seals
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$64.25 Each
|
 |
CHEVROLET LINK PIN -UPPER OUTER W/ SEALS. PASS & 53-62 CORVETTE
Upper outer w/ seals. Fits Pass & 53-62 Corvette.
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$39.50 Each
|
 |
CHEVROLET LINK PIN -LOWER, OUTER W/ SEALS. PASS & 53-62 CORVETTE
Link Pin. Lower outer w/ seals. Fits Pass & 53-62 Corvette.
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$36.75 Each
|
|
Seals -Link Pin
|
 |
CHEVROLET SEALS -LINK PIN -UPPER OUTER
Seals-link Pin. Upper outer (4 pcs)
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$13.75 Set
|
 |
CHEVROLET SEALS -LINK PIN, UPPER OUTER & 53 -6
Seals-link Pin. Upper outer & 53-62 Corvette (4 pcs)
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$20.25 Set
|
 |
CHEVROLET SEALS -LINK PIN OUTER LOWER. ALSO FITS 53-62 CORVETTE (4 PIECES)
Seals-link Pin. OD=1-1/8", lower outer & 53-62 Corvette (4 pcs)
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$6.00 Set
|
|
Inner Shaft
|
 |
CHEVROLET INNER SHAFT (LOWER A-FRAME) LEFT SIDE W/ SEALS
Inner Shaft. Lower A-frame, left, w/ seals
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$157.50 Each
|
 |
CHEVROLET INNER SHAFT (LOWER A-FRAME) RIGHT SIDE W/ SEALS
Inner Shaft. Lower A-frame, right, w/ seals
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$157.50 Each
|
 |
CHEVROLET INNER SHAFT -LOWER A-FRAME & 53-62
Inner Shaft. Lower A-frame & 53-62 Corvette
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$63.00 Each
|
 |
CHEVROLET INNER SHAFT -UPPER A-FRAME. FITS PASSENGER CARS & 53-62 CORVETTE
Inner Shaft. Upper a-frame & 53-62 Corvette
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$31.50 Each
|
|
Seals-Inner Shaft
|
|
|
CHEVROLET SEALS -INNER SHAFT, LOWER A-FRAME & 53-62 CORVETTE (4 PCS)
Seals-inner Shaft. Lower A-frame & 53-62 Corvette (4 pcs)
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$20.25 Set
|
|
Bumper -Axle
|
 |
CHEVROLET BUMPER -STRAIGHT AXLE
Bumper-axle. Straight axle (2 pcs)
For 1936 1937 1938 Chevrolet Cars
|
$28.25 Pair
|
 |
CHEVROLET BUMPER -FRONT AXLE,(KB & JB)EXCHANGE
Bumper-axle. Front axle, KB & JB. Rebuild yours!
For 1939 1940 Chevrolet Cars
|
$61.00 Pair
|
|
Bumper (A-Frame)
|
 |
CHEVROLET BUMPER -UPPER A-FRAME. ALSO FITS 53-56 CORVETTE - STEELERUBBER
Bumper (a-frame). Upper A-frame also 53-56 Corvette (2 pcs). STEELERUBBER.
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$39.00 Set
|
 |
CHEVROLET BUMPER -UPPER A-FRAME. ALSO FITS 53-56 CORVETTE
Bumper (a-frame). Upper A-frame also 53-56 Corvette (2 pcs)
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$39.00 Set
|
 |
CHEVROLET BUMPER -LOWER A-FRAME (SNAP-IN TYPE)
Bumper (a-frame). Lower A-frame, snap-in type
For 1939 1940 1941 Chevrolet Cars
|
$20.00 Pair
|
 |
CHEVROLET BUMPER -LOWER A-FRAME, BOLT-IN. ALSO FITS 53-62 CORVETTE (STEELERUBBER)
Bumper (a-frame). Lower A-frame, bolt-in & 53-62 Corvette.
1/2" thread length.
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$30.25 Each
|
 |
CHEVROLET BUMPER -LOWER A-FRAME, BOLT-IN. ALSO FITS 53-62 CORVETTE
Bumper (a-frame). Lower A-frame, bolt-in & 53-62 Corvette
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$16.00 Set
|
|
King Pins
|
 |
CHEVROLET KINGPINS -STRAIGHT AXLE (EXC. CC, DC, EC & FC)
King Pins. Straight axle (except CC, DC, EC & FC)
For 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars
|
$137.50 Pair
|
 |
CHEVROLET KING PIN -DUBBONETT (KNEE ACTION)
King Pins. Dubbonett independent suspension.
For 1934 1935 1936 1937 1938 Chevrolet Cars
|
$80.00 Pair
|
 |
CHEVROLET KINGPINS -STRAIGHT AXLE
King Pins. Straight axle.
Bushing .919 in. O.D.
For 1937 1938 1939 1940 Chevrolet Cars
|
$97.75 Pair
|
 |
CHEVROLET KING PIN -DUBBONETT (KNEE ACTION) & 53-62 CORVETTE
King Pins. Knee action & 53-62 Corvette. Brass, size=.866 x 5.31
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$89.00 Pair
|
|
Dubbonett Rebuild Service
|
|
|
CHEVROLET DUBBONETT (KNEE ACTION) REBUILD SERVICE
Rebuild your stock suspension to keep it all original.
For 1934 1935 1936 1937 1938 Chevrolet Cars
|
$700.00 Each
|
|
Shocks
|
 |
CHEVROLET SHOCKS (EXCEPT GA, HA). $150/ PAIR CORE
Shocks. except GA & HA, 1201A, 1201B ($150 pr core)
For 1937 1938 Chevrolet Cars
|
$390.75 Left & Right
|
 |
CHEVROLET SHOCK (EXCEPT GA,HA) LEFT $75 CORE
Shocks. except GA & HA, left, 1201A ($75 core)
For 1937 1938 Chevrolet Cars
|
$162.00 Each
|
 |
CHEVROLET SHOCK (EXCEPT GA,HA) RIGHT -$75 CORE
Shocks. except GA & HA, right, 1201B ($75 core)
For 1937 1938 Chevrolet Cars
|
$162.00 Each
|
 |
CHEVROLET SHOCKS -FRONT (JB & KB BEAM AXLE)
Shocks (gas). Front, JB & KB, beam axle
For 1939 1940 Chevrolet Cars
|
$58.75 Set
|
 |
CHEVROLET SHOCKS (EXC. JB, KB). $200/ PAIR CORE
Shocks. except JB & KB, 2200A, 2200B ($200 core)
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$450.00 Left & Right
|
 |
CHEVROLET SHOCK (EXCEPT JB, KB) LEFT ($100 CORE)
Shocks. except JB & KB, left, 2200A ($200 core)
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$225.00 Each
|
 |
CHEVROLET SHOCK (EXCEPT JB, KB) RIGHT ($100 CORE)
Shocks. except JB & KB, right, 2200B ($200 core)
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$225.00 Each
|
 |
CHEVROLET SHOCKS -FRONT, GAS
Shocks. Front
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$95.75 Set
|
|
Shock Absorber Fluid
|
 |
CHEVROLET SHOCK ABSORBER FLUID
Shock Absorber Fluid.
For All Chevrolet Cars and Trucks
|
$8.25 Quart
|
|
Shock Bracket
|
 |
CHEVROLET SHOCK BRACKET -LOWER
Shock Bracket. Lower
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$16.00 Each
|
|
Seal Kit
|
 |
CHEVROLET SEAL KIT -DOES 1 DUBBONETT (KNEE ACTION) SHOCK
Seal Kit. Does 1 Dubbonette knee action shock
For 1934 1935 1936 1937 1938 Chevrolet Cars
|
$70.00 Each
|
|
Bushing (Rubber)
|
 |
CHEVROLET BUSHINGS -SHOCK, RUBBER W/ WASHERS & NUTS (8 SETS)
Bushings-shock. Rubber (8) w/ washers & nuts.
For 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars
|
$16.00 Set
|
 |
CHEVROLET BUSHING (RUBBER) SHOCK LINK FOR FRONT, BEAM AXLE
Bushing (rubber). Shock link beam axle
For 1930 1931 1932 1933 1934 1935 1936 1937 1938 Chevrolet Cars
|
$9.00 Pair
|
 |
CHEVROLET BUSHING -SHOCK LINK, DOUBLE ACTION
Bushing (rubber). Shock link double action shock.
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars
|
$7.25 Set
|
|
Shock Link
|
 |
CHEVROLET SHOCK LINK -8", 30-33 PASSENGER CARS (EXC. CC)
Shock Link. 8in. overall, except CC.
For 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars
|
$20.00 Each
|
 |
CHEVROLET SHOCK LINK (6-3/4") FC, GB, HB W/BEAM AXLE
Shock Link.
(1 side of link must be sized for tight fit)
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars
|
$20.00 Each
|
|
Front Leaf Spring Bolt
|
 |
CHEVROLET BOLT -LEAF SPRING CENTER, 2 PIECES (EXC. UTILITY)
Bolt. Leaf spring center (except utility vehicle) (2 pcs).
For All Chevrolet Cars and Trucks
|
$2.75 Set
|
|
U-bolt
|
 |
CHEVROLET U-BOLT W/ NUTS -SPRING TO AXLE (EXC. EC & FC)
U-bolt W/ nuts, spring to axle except EC & FC
For 1934 1935 1936 1937 Chevrolet Cars
|
$11.25 Each
|
2
