|
Motor Mounts
|
|
Frame Adapters -Chevy V8 Transplants - Street Rod
|
|
CHEVROLET MOTOR MOUNT -V8 SOLID STEEL (NO RUBBER CUSHION)
Motor Mount-V8 Conversion.
Steel (no rubber cushion).
Solid Steel motor mounts replace stock rubber mounts, and eliminate torque loss and linkage binding.
Recommended for rac...
For All Chevrolet Cars and Trucks
|
$35.00 Pair
|
|
MOTOR MOUNT -REPLACEMENT BISCUIT STYLE PAD FOR MOTOR MOUNT #3700332
Motor Mount-V8 Conversion.
Replacement biscuit style pad for wing style motor mounts (our part #3700332).
Also works with many vintage Hurst engine swap kits.
For All Cars and Trucks
|
$38.75 Pair
|
|
MOTOR MOUNTS -MOUNTS LS1 ENGINES IN CARS SETUP FOR SMALL BLOCK CHEVY
Motor Mount-V8 Conversion.
Use to mount LS1, LS6 or Vortec (4.8L, 5.3L or 6.0L) into cars setup for small block Chevy.
Includes Frame Mount Plates, Pads and mounting hardware...
For All Cars
|
$85.00 Pair
|
|
MOTOR MOUNTS -MOUNTS LS1 ENGINES IN CARS SETUP FOR SMALL BLOCK CHEVY. SETS ENGINE BACK 1"
Motor Mount-V8 Conversion.
Use to mount LS1, LS6 or Vortec (4.8L, 5.3L or 6.0L) into cars setup for small block Chevy.
Sets engine back 1" from standard SBC location.
In...
For All Cars
|
$85.00 Pair
|
|
Crossmember (Bolt In) - Street Rod
|
|
CHEVROLET CROSSMEMBER KIT (BOLT-ON) FOR MUSTANG II/ PINTO FRONT END. FITS 37-39 CHEVY CAR
Bolt-in crossmember kit provides superior strength and 2-1/2" adjustability for Mustang II/ Pinto front end. Uses stock pinto-mustang II geometry so there is no bump stee...
For 1937 1938 1939 Chevrolet Cars
|
$625.00 Each
|
|
CHEVROLET CROSSMEMBER KIT (BOLT-ON) FOR MUSTANG II/ PINTO FRONT END. FITS 40 CHEVY CAR
Bolt-in crossmember kit provides superior strength and 2-1/2" adjustibility for Mustang II/ Pinto front end. Center support rods add strength & durability to lower strut ...
For 1940 Chevrolet Cars
|
$625.00 Each
|
|
CHEVROLET CROSSMEMBER (BOLT-ON) FOR MUSTANG II/ PINTO FRONT END. FITS 41-48 CHEVY CAR
Bolt-in crossmember kit provides superior strength and 2-1/2" adjustability for Mustang II/ Pinto front end. Uses stock pinto-mustang II geometry so there is no bump stee...
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$625.00 Each
|
|
CHEVROLET CROSSMEMBER (BOLT-ON) FOR MUSTANG II/ PINTO FRONT END. FITS 49-54 CHEVY CAR
Bolt-in crossmember kit provides superior strength and 2-1/2" adjustibility for Mustang II/ Pinto front end. Uses wide lower A-arm for clearance. Center support rods add ...
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$625.00 Each
|
|
Crossmember - Motor Mounts - Street Rod
|
|
CHEVROLET MOTOR MOUNTS. WELD-ON OPTION FOR CHEVY SB CROSSMEMBER IF-4954CP
Option to have mounts welded to crossmember IF-4954CP. Comes ready to mount your '58 & up small block (bolt-on mounts available separately also). Add to IF-4954CP price.
Click...
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$86.00 Set
|
|
Crossmember (Heidts Weld In) - Chevy Cars - Street Rod
|
|
CHEVROLET CROSSMEMBER. MUSTANG II, HEIDTs WELD-IN (DELUXE - FULLY GROUND WELDS). 37-39 CHEV CAR
DELUXE. Fits '37-'39 Chevy Cars.
Correct design results in correct camber action
no bumpsteer
For 1937 1938 1939 Chevrolet Cars
|
$499.00 EA
|
|
CHEVROLET CROSSMEMBER. MUSTANG II, HEIDTs WELD-IN (STD). 37-39 CHEV CAR
STANDARD. Fits '37-'39 Chevy Cars.
Correct design results in correct camber action
no bumpsteer
For 1937 1938 1939 Chevrolet Cars
|
$399.00 Each
|
|
CHEVROLET CROSSMEMBER. MUSTANG II, HEIDTs WELD-IN (DELUXE - FULLY GROUND WELDS). 40-48 CHEV CAR
DELUXE. Fits '40-'48 Chevy Cars.
Correct design results in correct camber action
no bumpsteer
For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$499.00 EA
|
|
CHEVROLET CROSSMEMBER. MUSTANG II, HEIDTs WELD-IN (STD). 40-48 CHEV CAR
STANDARD. Fits '40-'48 Chevy Cars.
Correct design results in correct camber action
no bumpsteer
For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$399.00 Each
|
|
CHEVROLET CROSSMEMBER. MUSTANG II, HEIDTs WELD-IN (DELUXE - FULLY GROUND WELDS). 49-54 CHEV CAR
DELUXE. Fits '49-'54 Chevy Cars.
Correct design results in correct camber action
no bumpsteer
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$499.00 EA
|
|
CHEVROLET CROSSMEMBER. MUSTANG II, HEIDT'S WELD-IN (STD). 49-54 CHEV CAR
STANDARD. Fits '49-'54 Chevy Cars.
Correct design results in correct camber action
no bumpsteer
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$399.00 Each
|
|
Engine Mount Kit - Street Rod
|
|
CHEVROLET ENGINE MOUNTING KIT. BOLT-ON FOR 37-39 CHEVY CAR (NOT DELUXE), '58 & UP SMALL BLOCK W/ MUSTANG II IFS
Engine Mount Kit - Chevy. 37-39 Chevy Car. Fits Pinto/ Mustang II IFS conversions (won't fit '39 Deluxe or cars w/ cross steering). ('58 & up SB)
includes bolt on frame adap...
For 1937 1938 1939 Chevrolet Cars
|
$103.00 Set
|
|
CHEVROLET ENGINE MOUNTING KIT. BOLT-ON FOR 37-39 CHEVY DELUXE CAR, '58 & UP SMALL BLOCK W/ MUSTANG II IFS
Engine Mount Kit - Chevy. Deluxe straight axle cars (37-39 cars w/ cross steering). Will not fit Pinto/ Mustang II IFS. Offset mount on left for clearance.
Includes bolt on f...
For 1937 1938 1939 Chevrolet Cars
|
$109.00 Set
|
|
CHEVROLET ENGINE MOUNTING KIT. BOLT-ON FOR 1940 CHEVY CARS W/ C.E. OR ANY MUST II IFS KIT, '58 & UP SMALL BLOCK
Engine Mount Kit - Chevy. 1940 Chevy Car. For Chassis Engineering or Must II/ Pinto IFS kits. ('58 & up SB).
Includes bolt on frame adapters (can be welded on), Chassis Engin...
For 1940 Chevrolet Cars
|
$103.00 Set
|
|
CHEVROLET ENGINE MOUNTING KIT. BOLT-ON FOR 1940 CHEVY CARS W/ NON-CHASSIS ENGINEERING IFS KIT, '58 & UP SMALL BLOCK
Engine Mount Kit - Chevy. 1940 Chevy Car. For NON-Chassis Engineering IFS kits. ('58 & up SB).
Includes bolt on frame adapters (can be welded on), Chassis Engineering engine ...
For 1940 Chevrolet Cars
|
$103.00 Set
|
|
CHEVROLET ENGINE MOUNTING KIT. BOLT-ON FOR 1940 CHEVY CARS W/ DUBBONETT (KNEE ACTION) SHOCKS, '58 & UP SMALL BLOCK
Engine Mount Kit - Chevy. 1940 Chevy Car. Knee action shock front ends only. ('58 & up SB).
Includes bolt on frame adapters (can be welded on), Chassis Engineering engine mou...
For 1940 Chevrolet Cars
|
$103.00 Set
|
|
CHEVROLET ENGINE MOUNTING KIT. BOLT-ON FOR 1940 CHEVY CARS W/ STRAIGHT AXLE, '58 & UP SMALL BLOCK
Engine Mount Kit - Chevy. 1940 Chevy Car. Straight axle front ends only. ('58 & up SB).
Includes bolt on frame adapters (can be welded on), Chassis Engineering engine mounts,...
For 1940 Chevrolet Cars
|
$103.00 Set
|
|
CHEVROLET ENGINE MOUNTING KIT. BOLT-ON FOR 1940-48 CHEVY CARS W/ DUBBONETT (KNEE ACTION) SHOCKS, '58 & UP SMALL BLOCK
Engine Mount Kit - Chevy. 1941-48 Chevy Car. Knee action shock front ends only. ('58 & up SB).
Includes bolt on frame adapters (can be welded on), Chassis Engineering engine ...
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$103.00 Set
|
|
CHEVROLET ENGINE MOUNTING KIT. BOLT-ON FOR 1941-48 CHEVY CARS W/ C.E. OR ANY MUST II IFS KIT, '58 & UP SMALL BLOCK
Engine Mount Kit - Chevy. 1941-48 Chevy Car. For Chassis Engineering or Must II/ Pinto IFS kits. ('58 & up SB)
includes bolt on frame adapters (can be welded on), Chassis En...
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$103.00 Set
|
|
CHEVROLET ENGINE MOUNTING KIT. BOLT-ON FOR 49-54 CAR W/ STOCK SUSPENSION, '58 & UP SMALL BLOCK
Engine Mount Kit - Chevy. 1949-54 Chevy Car. For cars w/ stock suspension. ('58 & up SB).
Includes bolt on frame adapters (can be welded on), Chassis Engineering engine mount...
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$100.75 Set
|
|
CHEVROLET ENGINE MOUNTING KIT. BOLT-ON FOR 1949-54 CHEVY CARS W/ NON-CHASSIS ENGINEERING IFS KIT, '58 & UP SMALL BLOCK
Engine Mount Kit - Chevy. 1949-54 Chevy Car. For NON-Chassis Engineering IFS kits. ('58 & up SB).
Includes bolt on frame adapters (can be welded on), Chassis Engineering engi...
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$100.75 Set
|
|
Motor Mount -Use w/ V8 Brackets - Street Rod
|
|
CHEVROLET MOTOR MOUNT WITH ANTI-TORQUE LOCK
Use W/ V8 Brackets. Has anti-torque lock (w/ headers use #3988989B)
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$12.50 Each
|
|
CHEVROLET MOTOR MOUNT (ONLY FOR CARS W/ HEADERS)
Motor Mount -Use w/ V8 Brackets. Only for cars w/ headers.
See images for dimensions.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$12.50 Each
|
|
Frame Adapters -Chevy V8 Transplants - Street Rod
|
|
CHEVROLET MOTOR MOUNT KIT (BOLT IN) CHEVY V8
Bolt-in, for Chev V8
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$79.75 Pair
|
|
CHEVROLET MOTOR MOUNT KIT (BOLT IN) CHEVY V8 (FOR MUSTANG II CROSSMEMBER #599152D)
Motor Mount Brackets Bolt-in, for Chev V8 only fits with crossmember 599152D.
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$68.25 Pair
|
|
CHEVROLET BRACKETS - MOTOR MOUNT (WELD IN) CHEV V8
Motor Mount Brackets. Weld-in, for Chevy V8
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$47.25 Pair
|
|
CHEVROLET BRACKETS & MOTOR MOUNTS - (BOLT IN) CHEVY V8
Motor Mount-V8 Conversion. Motor mount & bracket, bolt-in. Fits Chev V8, both big and small block.
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
|
$134.50 Pair
|
|
Motor Mount-Front
|
|
CHEVROLET MOTOR MOUNT -FRONT
Motor Mount-front. 2 per car
For 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 Chevrolet Cars
|
$25.00 Each
|
|
CHEVROLET MOTOR MOUNT -CENTER (1 UPPER, 1 LOWER)
Motor Mount-front. 1 upper, 1 lower (2 per car).
For 1952 1953 1954 Chevrolet Cars
|
$22.50 Pair
|
|
Motor Mount-Rear
|
|
CHEVROLET MOTOR MOUNT -REAR 35-47 ALL & 48 CABRIOLET
Motor Mount-rear. Rectangular shape (2 per car), fits all 35-47 & 48 Cabriolet.
For 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$20.00 Each
|
|
CHEVROLET MOTOR MOUNT -REAR (EXC. CABRIOLET) "M" SHAPED
Motor Mount-rear. M shape, (excluding Cabriolet). Car uses 2. Original '48 part & requires '48 engine brackets.
Correct GM replacement 35-47 w/ 48 mounting brackets.
For 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
|
$22.00 Each
|
|
CHEVROLET MOTOR MOUNT -REAR (USES 2)
Motor Mount-rear. Car uses 2
For 1949 1950 1951 Chevrolet Cars
|
$14.00 Each
|